ECS Tuning refresh kits will not only rejuvenate the suspension in your vehicle, but improve it to better than new with select upgraded components.
Symptoms of a worn suspension include a loose feel in the rear end under hard acceleration, clunking over bumps, vibration at speed or excessive tramlining. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life.
If your vehicle is receiving a subframe mount reinforcement installation, this is the ideal bushing kit to complement the work.
Level 2 includes:
2 rear shock mounts from the E46 M3
2 rear shock mount reinforcement plates from the Z3
2 rear upper control arm bushings
2 camber arm bushings
4 rear upper and lower trailing arm ball joint upgrade
3 differential bushing
4 rear subframe bushings
2 trailing arm bushings
2 rear shock mount gaskets
Upgrading the rear shock mounts and adding reinforcement plates is highly recommended because of the known failures with the mounts ripping apart. Replacing the lower trailing arm bushings with a ball joint will not only give a more solid feel in the suspension but last longer due to its rubber seal design.
See Kit Contents below for exact details.
Shorter end link for your lowered BMW The sway bar on your vehicle is essentially a connection between the left and right lower control…
Includes the upgraded ball joints from the Performance Package Over the years, the road takes a serious toll on your suspension. Pot holes, speed bumps, and…
