Please Note: Only available for purchase and shipment in the United States
034Motorsport is proud to announce the X34 Carbon Fiber MQB Cold Air Intake System for the 1.8T & 2.0T EA888 Gen 3 engines found in the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R!
034Motorsport engineers started by identifying the shortcomings of the factory intake system to determine which components restricted airflow to the turbocharger inlet. While the factory lower airbox and fresh air duct to the core support were more than sufficient for increased power levels, the factory air filter, upper airbox, and turbo inlet tube were deemed too restrictive, even with the factory turbocharger.
034Motorsport's mechanical engineers scanned the factory engine bay and modeled a one-piece unit to replace the factory intake tube and upper airbox. By eliminating the multiple couplers, transitions, and jagged features in the factory upper airbox and intake tube, 034Motorsport's engineering team was able to drastically reduce turbulence in the intake tract, and virtually eliminate pressure drop in the intake system before the turbo inlet.
Multiple iterations were prototyped in plastic using 034Motorsport's in-house FDM 3D printer and thoroughly tested. Ultimately, the best-performing design was a fully-enclosed unit featuring a massive 4" inlet at the air filter and a large-diameter one-piece intake tube with smooth transitions all the way back to the factory turbo inlet.
To ensure that the X34 MQB Cold Air Intake System draws in cool, dense air, the system is manufactured entired from carbon fiber, and completely enclosed to prevent hot air from the engine bay from . By bolting to the factory lower airbox, this design allows the enclosed high-flow conical filter to breathe fresh, cold air from the factory inlet duct before the radiator.
- Developed In-House by 034Motorsport's Engineering Team
- One-Piece Design with High-Quality Carbon Fiber Construction
- OEM+ Fit & Finish Retains Factory Lower Airbox & Inlet Duct
- Fully-Enclosed Design with Large Diameter 4" Inlet Pleated Cotton Air Filter
- Large-Diameter CFD-Optimized Air Intake Tube
- Dyno-Proven Horsepower & Torque Gains
- Improved Engine & Induction Sounds
- Increased Throttle Response
- Improved Airflow from Factory Airbox & Intake Tube
- Compatable with SAI Equipped & Non-SAI Equipped Vehicles - No Additional Parts Required!
- Installs Easily in Minutes!
- 034Motorsport Carbon Fiber MQB Air Intake System
- 034Motorsport Double-Layer Pleated Air Filter
- Integrated SAI Adapter Fitting
- Installation Hardware
This comprehensive air intake system is designed to install on vehicles with or without factory secondary air injection (SAI) systems.
This Part Fits the Following Vehicles
|Audi||MK3 TT (2014+)||Quattro||2.0T|
|Volkswagen||Golf VII||GTI||1.8T Gen3|
|Volkswagen||Golf VII||Hatchback||1.8T Gen3|
|Volkswagen||Golf VII||Sportwagen||1.8T Gen3|
|Volkswagen||Golf VII||GTI||2.0T Gen3|
|Volkswagen||Golf VII||Hatchback||2.0T Gen3|
|Volkswagen||Golf VII Facelift||FWD||1.8T Gen3|
|Volkswagen||Golf VII Facelift||FWD||2.0T Gen3|
|Volkswagen||Golf VII R||4Motion||2.0T Gen3|
|Volkswagen||Golf VII R||GTI||2.0T Gen3|
|Volkswagen||Golf VII R Facelift||4Motion||2.0T Gen3|