Gruven started with a center body made from 303 Stainless Steel hex bar to replace the flimsy non-adjustable OEM spaghetti links. Gruven then add super strong 6,000 lbs radial load capacity THK sealed ball joints with a proprietary PEEK liner on either end to provide many years of noise free operation. The ball joints have integral dust boots to seal out the elements and do not require any maintenance. These linkages will not deflect under the hardest track corners and will provide the most accurate handling. The proprietary THK links are the best rod ends available and are tuned specifically for the high frequency vibrations of swaybar end links. When you are done with the other brands that rattle and wear out in a few months, you will appreciate the switch to these !
All center sections are powder coated with a thick layer of either Gloss Black
Gruven's design allows simple and quick adjustment on the car. Simply loosen the jam nuts at either end and spin the center body portion to lengthen or shorten, then retighten the jam nuts.
This adjustable design will provide quick adjustment on the car, which is enough to handle all lowered (or raised) set ups. You want the stabilizer bar end links to be as vertical as possible, perpendicular to the swaybar itself to avoid any loading in the fwd/aft direction.
This Part Fits the Following Vehicles