Product Details
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature
stability, extreme-pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100°F to 500°F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.
Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo
mechanisms, and applications where vibrations can cause fretting wear and corrosion to take place. Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under
high-temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will slightly darken after
high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based
greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.
Product features:
- Outperforms the best conventional or synthetic greases and lubes
- Withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints
- Excellent high-temp stability, extreme-pressure protection, and water resistance
- Used in a variety of applications with operating temps from -100°F to 500°F
- Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
- Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
- Synthetic fluidity allows increases in bearing life up to 200%
- Will darken after high-temp use-not detrimental to performance
Properties:
- 4-Ball Wear (ASTM D-4172B)0.46
- 4-Ball Weld (ASTM D-2783)400 Kg
- Load/Wear Index (ASTM D-2783)71.1
- Drop Point900°F+
This Part Fits the Following Vehicles
Make | Model | Submodel | Engine |
---|---|---|---|
Audi | All | All | All |
BMW | All | All | All |
Mercedes Benz | All | All | All |
MINI | All | All | All |
Porsche | All | All | All |
Volkswagen | All | All | All |
Volkswagen | Alltrack | All | 1.8T Gen3 |
Volkswagen | Atlas | 4Motion | 3.6L V6 |
Volkswagen | Atlas | FWD | 2.0T Gen3 |
Volkswagen | Atlas | FWD | 3.6L V6 |
Volkswagen | CC | 4Motion | VR6 |
Volkswagen | Golf R | All | 2.0T |
Volkswagen | Golf VII | Sportwagen | 1.8T Gen3 |
Volkswagen | Golf VII | Sportwagen | TDI |
Volkswagen | Golf VII R | 4Motion | 2.0T Gen3 |
Volkswagen | Passat B5 | 4 Motion | 1.8T |
Volkswagen | Passat B5 | 4 Motion | V6 30v |
Volkswagen | Passat B5 | 4 Motion | W8 |
Volkswagen | Passat B6 | 4 Motion | 3.6L |
Volkswagen | Phaeton | 4 Motion | V8 |
Volkswagen | Phaeton | 4 Motion | W12 |
Volkswagen | R32 MKIV | All | 3.2 |
Volkswagen | R32 MKV | All | 3.2 |
Volkswagen | Tiguan 1 | 4 Motion | 2.0T |
Volkswagen | Tiguan 2 | 4 Motion | 2.0T |
Volkswagen | Tiguan MQB | 4Motion | 2.0T Gen3 |
Volkswagen | Touareg 1 | All | TDI |
Volkswagen | Touareg 1 | All | V6 |
Volkswagen | Touareg 1 | All | V8 |
Volkswagen | Touareg 2 | All | TDI |
Volkswagen | Touareg 2 | All | V10 TDI |
Volkswagen | Touareg 2 | All | V6 |
Volkswagen | Touareg 2 | All | V6 TDI |
Volkswagen | Touareg 2 | All | V8 |
Volkswagen | Touareg 3 | All | V6 |
Volkswagen | Touareg 3 | All | V6 TDI |
Volkswagen | Touareg 3 | All | V8 |
Volkswagen | Touareg 3 | Hybrid | All |