Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Set of 4 connecting rods, to be paired with 22mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For TSI engines only - To be used with aftermarket pistons with 22mm wrist pin
Forged Alloy pistons with 22mm wrist pin with +.5mm overbore
Must bore and hone the block to exact specification to ensure the best results
For vehicles with TSI engine only
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
A high-performance bottom-end rebuild kit featuring Tuscan I-beam connecting rods and 83mm overbore forged pistons.
For TSI engines only - To be used with aftermarket pistons with 22mm wrist pin
Includes upper and lower bearing shells for a complete main bearing replacement. .001 Oil Clearance.
For vehicles with TSI engines only
Forged alloy pistons - 82.5mm Bore (stock), 20mm wrist pins, 9.0:1 compression ratio
For vehicles with FSI engines only
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
Set of 4 connecting rods to be paired with 21mm wrist pin OEM pistons
For vehicles with TSI engines and for use with OEM pistons with 21mm wrist pin only.
Includes rings, wrist pins, and pin locks - 82.5mm bore, 9.5:1 CR
For vehicles with FSI engines only
Set of 4
For vehicles FSI engines only - For use with factory pistons
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For vehicles with TSI engines and for use with aftermarket pistons with 21mm wrist pin only.
Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
For vehicles with FSI engines only
82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke - Includes rings, wrist-pins, & circlips
For vehicles with FSI engines only
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
For vehicles with FSI engines only
Stock fitment while being able to handle higher boost applications
FITS FACTORY PISTONS WITH 20MM WRIST PINS ONLY
This product was last offered at the strikethrough price on
09-29-2026