Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
Set of 4 connecting rods, to be paired with 22mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For TSI engines only - To be used with aftermarket pistons with 22mm wrist pin
High quality performance valve springs and titanium retainers
Forged Alloy pistons with 22mm wrist pin with +.5mm overbore
Must bore and hone the block to exact specification to ensure the best results
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
For vehicles with FSI engines only. For use with aftermarket pistons only.
The highest quality race bearings available.
Not for use with stock rods
Aftermarket performance intake and exhaust valve springs and retainers for your high revving FSI.
For vehicles with FSI engines only
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-07-2026
A high-performance bottom-end rebuild kit featuring Tuscan I-beam connecting rods and 83mm overbore forged pistons.
Complete set includes 8 stainless intake valves, 8 inconel exhaust valves, and 32 single groove keepers
Includes upper and lower bearing shells for a complete main bearing replacement. .001 Oil Clearance.
For vehicles with TSI engines only
Forged alloy pistons - 82.5mm Bore (stock), 20mm wrist pins, 9.0:1 compression ratio
For vehicles with FSI engines only
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
For vehicles with FSI engines only. For use with aftermarket pistons only.
Set of 4 connecting rods to be paired with 21mm wrist pin OEM pistons
For vehicles with TSI engines and for use with OEM pistons with 21mm wrist pin only.
Includes upper and lower bearing shells for a complete rod bearing replacement.
Includes rings, wrist pins, and pin locks - 82.5mm bore, 9.5:1 CR
For vehicles with FSI engines only
Includes complete cylinder head, required gaskets, hardware, oil and coolant!
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
08-26-2026