144x20mm forged H-beam rods from Integrated Engineering.
5X Entries For Our 25th Anniversary Sweepstakes!
*To be used with aftermarket pistons with 20mm wrist pins*
144x20mm forged H-beam rods from Integrated Engineering.
5X Entries For Our 25th Anniversary Sweepstakes!
*To be used with aftermarket pistons with 20mm wrist pins*
Includes springs, retainers, and spring seats
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-19-2026
144x20mm forged H-beam rods from Integrated Engineering.
5X Entries For Our 25th Anniversary Sweepstakes!
*To be used with aftermarket pistons with 20mm wrist pins*
Designed to withstand up to 1100hp!
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Existing factory triple-groove valve keepers are to be reused*
Includes rings, wire locks, and wrist pins - 81.5mm bore, 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
High quality performance valve spings and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
IE Street/Race Exhaust Camshaft for 400+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Standard sized valve head diameter, factory triple groove keeper setup
*Valves priced individually - For 1.8T - qty 8 needed / For 2.7T - qty 12 needed - Please see long description for additional valve seal/keeper informati
IE Street/Race Intake Camshaft for 400+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Set of 4
5X Entries For Our 25th Anniversary Sweepstakes!
Standard sized valve head diameter, factory triple groove keeper setup
*Valves priced individually - For 1.8T - qty 12 needed / For 2.7T - qty 18 needed - Please see long description for additional valve seal/keeper informa
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Existing factory triple-groove valve keepers are to be reused*
Set of 4, rifle drilled
5X Entries For Our 25th Anniversary Sweepstakes!
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
5X Entries For Our 25th Anniversary Sweepstakes!
Requires 2mm overbore