Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Set of 4 connecting rods, to be paired with 22mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For TSI engines only - To be used with aftermarket pistons with 22mm wrist pin
Forged Alloy pistons with 22mm wrist pin with +.5mm overbore
Must bore and hone the block to exact specification to ensure the best results
For vehicles with TSI engine only
High quality performance valve springs and titanium retainers
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
The highest quality race bearings available.
Not for use with stock rods
Aftermarket performance intake and exhaust valve springs and retainers for your high revving FSI.
For vehicles with FSI engines only
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-07-2026
A high-performance bottom-end rebuild kit featuring Tuscan I-beam connecting rods and 83mm overbore forged pistons.
For TSI engines only - To be used with aftermarket pistons with 22mm wrist pin
144x22 I beam connecting rods to be used with aftermarket pistons with 22mm wrist pins - Set of Five
Powerful Reliability for the street or track! Includes rings, wire locks, and wrist pins - 82.5mm bore, 9.3:1 CR, 22mm wrist pins (for use with IE rods)
*Requires aftermarket connecting rods with a non-tapered 22mm small end*
Complete set includes 8 stainless intake valves, 8 inconel exhaust valves, and 32 single groove keepers
Includes upper and lower bearing shells for a complete main bearing replacement. .001 Oil Clearance.
For vehicles with TSI engines only
Forged alloy pistons - 82.5mm Bore (stock), 20mm wrist pins, 9.0:1 compression ratio
For vehicles with FSI engines only
Set of 4 connecting rods to be paired with 21mm wrist pin OEM pistons
For vehicles with TSI engines and for use with OEM pistons with 21mm wrist pin only.
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
Set of 4, Rifle drilled
For vehicles with FSI engines only. For use with aftermarket piston with 20mm wrist pin only.