Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin - Varying Comp Ratio: (2.0T TSI EA888 Gen 1 & 2 (2008-2014): 9.5:1 CR), (2.0T TSI EA888 Gen 3 (2015+): 9.3:1 CR)
For vehicles with TSI engine only
Forged Alloy pistons with 22mm wrist pin with +.5mm overbore
Must bore and hone the block to exact specification to ensure the best results
For vehicles with TSI engine only
Powerful Reliability for the street or track! Includes rings, wire locks, and wrist pins - 82.5mm bore, 9.3:1 CR, 22mm wrist pins (for use with IE rods)
*Requires aftermarket connecting rods with a non-tapered 22mm small end*
Forged alloy pistons - 82.5mm Bore (stock), 20mm wrist pins, 9.0:1 compression ratio
For vehicles with FSI engines only
Includes rings, wire locks, and wrist pins - 81.5mm bore, 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Forged alloy pistons - 83mm Bore (+.5mm overbore), 20mm wrist pins, 9.25:1 compression ratio
For vehicles with FSI engines only
Includes rings, wire locks, and 21mm wrist pins - 83.0mm bore (0.5mm overbore), 92.8mm stroke (stock)
To be used with connecting rods that accept 21mm wrist pins
Includes rings, wrist pins, and pin locks - 82.5mm bore, 9.5:1 CR
For vehicles with FSI engines only
Includes rings, wire locks, and 21mm wrist pins - 82.5mm bore (stock), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 21mm wrist pins
82.5mm bore (standard), 9.1:1 compression ratio, 92.8mm stroke - Includes rings, wrist-pins, & circlips
For vehicles with FSI engines only
Includes rings, wire locks, and wrist pins - 83mm bore, 9.0:1 CR, 90.2mm stroke
Includes rings, wire locks, and wrist pins - 82mm bore, 10.0:1 CR, 90.2mm stroke
Supertech .5mm oversized piston set including 20mm wrist pins.
piston set with the strength to withstand high power numbers
Requires 2mm overbore
82.50 Mm Bore – 1.165 In. CH, -7.40 CC, 20mm Pin, 3.248 in. Bore, 9.50:1, Inverted Dome/Dish
For vehicles with FSI engines only
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
For vehicles with FSI engines only