CTS Turbo is proud to announce the release of their long-awaited BOSS kit for EA888 Gen3 vehicles. This is a complete bolt-on big turbo solution for Gen3 Non-MQB (CPLA/CPPA) engines. After a lengthy development and testing process, this kit is now ready to hit the market. The biggest challenge was to design a big turbo upgrade that works seamlessly with your existing aftermarket mods without having to make any custom parts like with IS38 swaps. This was achieved by CTS's engineering team by using the latest in 3D rapid prototyping technology. The final prototype was installed and tested in their 2017 VW GLI.
To install, simply remove the factory turbocharger, transfer and calibrate the factory wastegate actuator and re-install using supplied installation hardware. You must update your tuning software to Unitronic Stage 3 (Not available from ECS, please see your local Unitronic dealer).
This high-performance 67mm turbo was designed to fulfill the demand from customers who desire a direct-bolt-on turbo for the E888 Gen3 platform. The turbo has a perfect balance between spool-up time and power capabilities of 400+ hp. The dual-ball bearing CHRA is made from heat-resistant ceramic. The assembly was finished on a VSR high-speed balancer. The result is a reliable 400hp on stock fueling system running 93 octane straight from the pump.
- 400hp+ dual ball-bearing 67mm turbocharger.
- Factory location bolt-on hardware solution, compatible with 3" intakes, 3" downpipes and factory location turbo outlet pipe.
- Proprietary 3' compressor cover with factory-spec intake and outlet locations.
- Stainless steel flow-optimized exhaust housing, factory wastegate geometry.
- Relocated diverter valve location allows for easy installation or upgrade.
- Oil and coolant lines are included for easy installation using factory connections.
- Compatible with factory wastegate actuator.
- No upgrades to the fueling system required.
- 3" high-flow intake system
- 3" high-flow downpipe
- Upgraded intercooler
- Upgraded charge pipe set
- Unitronic Stage 3 Software Tuning (Not available from ECS, please see your local Unitronic dealer).
This Part Fits the Following Vehicles
|Volkswagen||Jetta VI||Sedan||1.8T Gen3|
|Volkswagen||Jetta VI||Sedan Facelift||1.8T Gen3|
|Volkswagen||Jetta VI||Sedan||2.0T Gen3 GLI|
|Volkswagen||Jetta VI||Sedan Facelift||2.0T Gen3 GLI|
|Volkswagen||Passat B7||FWD||1.8T Gen3|