Sometimes you have to take the cylinder head off of your vehicle to diagnose problems, have it rebuilt, or replace a faulty head gasket. It tends to be a fairly labor intensive job, so anytime you can make it easier is definitely helpful.
When it comes time for reassembly, one of the biggest problems is finding quality gaskets and seals. ECS Tuning has your solution with this cylinder head gasket kit. With so many gaskets that are one use only to replace, getting them all done at the same time can be made harder by not having everything you need. With the proper, high quality gaskets, your reassembly will go much easier with no need for trip after trip to the local auto parts stores. Intake, exhaust, downpipe, valve cover, and in some applications valve seals will all help to get your engine into top condition.
When it's time to put everything back together, there are some things that should not be overlooked. Most cylinder head fasteners found on European automobiles are a one time use or stretch bolt. To be sure that everything is tightened down properly, it is important to replace them to get the proper torque reading and ensure the longevity of your repair.
During removing and installation, you will probably run across some unique fasteners. Check the tool section of ECS Tuning's website to be sure you have everything you need to remove the cylinder head.
This Part Fits the Following Vehicles
|BMW||Z3||M Coupe||S52 3.2L|
|BMW||Z3||M Roadster||S52 3.2L|