The frames of the 6000ELX are super-long, surpassing even the extended-length TLX series. This elongated frame design is particularly suited for vehicles with extremely long wheelbases, making it compatible with virtually all contemporary electric vehicles (EVs) as well as other models boasting extended wheelbases, including high-end luxury vehicles with lift points extending to the far edges of the vehicle frame.

QuickJack's cantilevered frames are meticulously engineered to prevent any contact with your vehicle's tires as they ascend. As with all QuickJack products, this premium model maintains the hallmark open-center car lift design and convenient portability found in our TL and TLX models. Additionally, it includes automatic safety locks as a standard feature. Taking seconds to get up and running following initial one-time assembly, just drop it on the ground and hook-up the power. As soon as the jack frames and rubber blocks are in place under your vehicle, it'll be at a work-ready height in no time at all.

Working in a garage can become troublesome when stuck with only a jack and a few jack stands. Not only are jack-stands very unsteady at raised heights, it also requires the long, tedious process of raising each corner individually. Eliminate this issue with a vehicle lift that is unlike any other lifting system you have seen! QuickJack can raise your vehicle with the push of a button, raising your vehicle to the lift's maximum height in just seconds. This allows you complete access to service your vehicle's suspension, drivetrain, and under body, without any crossbeams to get in your way. Also, keeping safety paramount, QuickJack uses rugged, welded steel construction for strength and rock solid stability, and features auto-locking bars that lock the lift and vehicle at a set height until you are finished. This ensures the lift will never fail with you underneath, standing up to the toughest real-world garage and track conditions.

**INTERNATIONAL CUSTOMERS NOTE** We are unfortunately unable to offer QuickJack internationally at this time. All international orders will be cancelled.

Features:

• Automatic safety locks
  • The 6,000-lb. capacity 6000ELX features the same automatic mechanical locks as our TL and TLX models. Your QuickJack is safe to lift anything (under the weight limit) that reaches the lift points.
• Extended lift point spread
  • With a lift point range of 47.5" – 76", there isn’t much the ELX can’t handle. Its minimum range covers most sports cars, sedans, light-duty trucks, etc. Its maximum range makes it one of the only—if not the only—car lift that can lift vehicles with the longest wheelbases on the consumer market.
• One-touch button control
  • The single touch of a button lifts the electric-hydraulic frames, getting your vehicle over 21" in the air in about 30 seconds. One more push safely lowers vehicles onto the mechanical locks. Leave your precious cargo raised for minutes, hours, days, weeks or even months—however long it takes to finish your work.
• Built-in hydraulic flow divider
  • The flow divider, built right into the power unit, ensures the frames lift evenly at all times. This is necessary because there is no crossbar(s) to act as a "brace" or mechanical leveler. Since the freedom of our open-center design is one of QuickJack’s most attractive features—and virtually no one else offers it—the promise of a level rise and descent is the most important one we can make.

Includes:

• 6000ELX Left Frame Assembly
• 6000ELX Right Frame Assembly
• 1x Hydraulic power unit with control
• 4x Medium rubber lift blocks (2")
• 4x Tall rubber lift blocks (3")
• 2x Short hydraulic hoses
• 2x Long hydraulic hoses
• 2x Frame-positioning handles
• Fittings and thread tape for setup
• Instruction manual

Not Included With Standard Frame Set:

• Up to 3 liters of Automatic Transmission Fluid
• Air source to inflate air cylinders up to 50 PSI
• Assembly tools

Specifications:

• Lifting capacity
  • 6,000 lbs. (2,722 kg)
• Lowered height
  • Frame only: 3.5" (89 mm)
  • With 2" block: 4" (102 mm)
• Lifting height
  • With 2" block: 21.5" (546 mm)
  • With 3" block: 22.5" (572 mm)
  • Max. height: 24.5" (622 mm)
  • With adapters: 24.25" (610 mm)
  • With adapters + pin: 7" (686 mm)
• Lift point spread
  • Maximum: 76" (1,930 mm)
  • Minimum: 53" (1,346 mm)
• Frame dimensions (ea.)
  • Width: 12.5" (318 mm)
  • Length: 86.75" (2,203 mm)
  • Height: 3.5" (89 mm)
  • Weight: 112 lbs. (51 kg)
• Other specs
  • Time to full rise: 30 seconds
  • Power unit weight: 30 lbs. (13 kg)
  • Shipping dimensions (ea. frame):
    • 89.75" (L) x 16.75" (W) x 6" (H)
    • (2,279 mm x 425 mm x 154 mm)
  • Shipping weight: 318 lbs. (144 kg)