Tune at Home with UniCONNECT+ cable!
This platform is supported with Unitronic’s UniCONNECT+ cable, empowering you to tune your vehicle from the comfort of your own home or garage. The cable and associated software allows you to install, and upgrade, your new Unitronic ECU tunes, flash back to stock file in addition to reading and clearing DTCs. This is a perfect option for people who like to be autonomous or who don't have a Unitronic Authorized Dealer nearby!

Features:

Engineered with Strict Industry Standards
With over 10 years of experience with Bosch and Siemens engine management systems and calibrations, Unitronic is able to utilize its expertise, industry leading tools and equipment to ensure an optimal calibration; delivering maximum performance, while maintaining complete OEM-like reliability and drivability.

Extensively Tested Under Various Driving Conditions
Development begins using Unitronic’s in-house Maha Chassis dyno housed in an environmentally controlled cell; closely monitoring a plethora of operational data, utilizing industry leading calibration tools and resources. Beta calibrations are then tested in street and track scenarios, using multiple cars under various driving conditions. This engine calibration strategy ensures Unitronic Performance Software delivers maximum performance, OEM-like drivability and reliability anywhere in the world. Unitronic Performance Software is only released to its Clients once development is thoroughly completed in accordance to Unitronic’s strict standards.

Factory Safety Limiters Retained
OEM “fail safes” are retained within the ECU calibration. Close monitoring of all operation parameters ensures that engine operation stays within factory components limits, resulting in reliability.

Optimized Responsiveness, Smoothness, Drivability, and Comfort
Unitronic’s ECU calibrations are engineered to improve engine response and reduce low-end lag. Unitronic’s Performance Software has gained worldwide recognition and is well known for its broad powerband, with smooth power delivery, maximizing responsiveness and “area under the curve”, under normal and hard acceleration.

Optimized Maximum Output
Unitronic’s ECU Calibrators deliver the maximum power output while staying within the operational limits of the factory engine and drivetrain components. Specifically, this results in the highest engine performance without sacrificing the reliability of the engine, turbocharger, or other engine and drivetrain components.

Power Delivery Perfectly Optimized Throughout the Power Band
Aligned with the OEM strategy, the calibration is designed to offer a large flat torque plateau to provide a smooth and linear power band. Maximum torque output is achieved sooner and maintained longer which creates a broader torque plateau and greater area under the curve. This results in an improved acceleration and optimal engine operation.

Improved Fuel Efficiency
Optimized timing and injection in cruising condition allows for an improved fuel efficiency, under normalized driving conditions.

Ignition Timing Precisely Calibrated for Higher Octane Fuel
Engine calibration optimized to take advantage of higher fuel quality to extract maximum energy from the combustion. Therefore, when using a higher octane fuel, more power and better fuel efficiency will be achieved.

Speed Governor Removed
Vehicle speed limiter within ECU is removed. (Subject to transmission rotational speed limit.)

RPM Limiter Increased to 7100 (With Stock Head)

Stage 1 Adds:

• Up to 45 horsepower and 68 lb-ft of torque on 91 Octane.

Stage 1+ Adds: 

• Up to 50 horsepower and 85 lb-ft of torque on 93 Octane
• Ignition Timing Precisely Calibrated for Higher Octane Fuel
• Includes all Stage 1+ tune variants and all lower software stages.

Stage 2 Adds:

• Up to 60 horsepower and 88 lb-ft of torque on 93 Octane
• Optimized for a High Flow Catalytic Converter
• Includes all Stage 2 tune variants and all lower software stages. *Does not include Stage 2 HPFP.

Stage 2 Requirements:

• High Flow Downpipe

Stage 2 HPFP Adds: 

• Up to 75 horsepower and 98 lb-ft of torque on 93 Octane
• Optimized for a Upgraded High Pressure Fuel Pump

Stage 2 HPFP Requirements: 

• High Flow Downpipe
• High Pressure Fuel Pump Upgrade

Stage 2+ Adds:

• Up to 135 horsepower and 128 lb-ft of torque on 93 Octane

Stage 2+ Requirements: 

• Cold Air Intake
• K04 Turbo Upgrade
• High Flow Downpipe
• S3 Injectors (06F 906 036F)
• High Pressure Fuel Pump Upgrade

Stage 3 Adds:

• Up to 300 horsepower gains depending on build specifications.

Big Turbo Software Precisely Engineered to Run 20psi of Boost on a Stock Engine. (For over 400HP you need a built engine).

If using an external wastegate, it needs to have a 1 bar spring. If using an internal wastegate, you need to use 1 bar preload pressure. Use a 3" ID MAF housing with 8J TTRS DI Injectors, an 8J TTRS LPFP (with the stock OEM controller), a HPFP Upgrade, and the HPFP inlet fitting drilled to a 5mm ID. Any Big Turbo Stage 3 build should be accompanied by a built engine to handle the added power and torque. Basic "full bolt ons" are also required to support this upgrade (ex. Intake, Intercooler, Downpipe etc.). This formula works day in, day out, and is tried and true throughout the world.

Requirements:

• GT28-GT30-GT35 Series Turbo or Similar Size
• Stock Throttle Body Only
• Stock Cams Only
• Optional MAF
• Upgraded Intercooler
• High Flow Downpipe
• Upgraded Exhaust System
• RS4 Injectors
• High Pressure Fuel Pump Upgrade
• Upgraded intake (OEM MAF size required)

Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.