6 piston calipers featuring two-piece floating high cast carbon discs.
Minimum 18" wheel diameter required​. Requires shims between the bearing housing/upright and caliper mounting bracket to centralize the disc between the pad surfaces – failure to do so will cause caliper and rotor damage.
6 piston calipers featuring two-piece floating high cast carbon discs.
Minimum 18" wheel diameter required​. Requires shims between the bearing housing/upright and caliper mounting bracket to centralize the disc between the pad surfaces – failure to do so will cause caliper and rotor damage.
This kit will allow you to run the wheel/tire combo you need to drop you ET’s all while putting the car on a significant diet over the stock rear brake set up.
2X Entries Into Our F80 M3 Sweepstakes *Designed for light street use, and drag racing ONLY. Never use for heavy braking racing environments suc
Direct replacement rotors that reduce rotational mass and feature J-Slots for less noise but same benefits as conventional slots
2X Entries Into Our F80 M3 Sweepstakes
Increasing your stopping power and efficiency is an important role in the safety of your vehicle, especially if it has been modified to attain greater speeds than the factory had intended. Bolt-on more efficient stopping with one of our performance RPS kits featuring ECS Geomet rotors or go all-out and bolt-on big, meaty brakes with 4 or 6 piston calipers. We also offer high-performance braking fluids, stainless braided direct-fit hoses, and a wide selection of performance brand name brake pads. Get it all here at ECS Tuning.
