Better airflow for more power
CARB certified for sale in all 50 states
Better airflow for more power
CARB certified for sale in all 50 states
Flow-bench optimized to provide maximum performance with your factory intake system!
Call In Or Chat For Best Price!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-22-2026
Complete set of Ferrea high performance valve springs, and titanium retainers
Increase airflow for your 2.0T or 3.0T equipped B9 A4/S4/Allroad with the 034Motorsport X34 Carbon Fiber Intake Air Scoop!
Will not fit vehicles with the active grille shutter system, such as B9.5 A4 and allroad.
This product was last offered at the strikethrough price on
08-17-2026
Increase power by containing exhaust heat - Lava
JHM Fuel Pump Internals Upgrade installed into a brand new OEM Hitachi High Pressure Fuel Pump.
High flow filter replacement to get your engine breathing better than new!
This product was last offered at the strikethrough price on
06-13-2026
For VW/Audi 1.8L 20V 83mm
Includes rings, wire locks, and 23mm wrist pins - 83.0mm bore (0.5mm overbore), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
82.50 Mm Bore – 1.165 In. CH, -7.40 CC, 20mm Pin, 3.248 in. Bore, 9.50:1, Inverted Dome/Dish
For vehicles with FSI engines only
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and 23mm wrist pins - 82.5mm bore (stock), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
Includes rings, wire locks, and 21mm wrist pins - 83.0mm bore (0.5mm overbore), 9.1:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 21mm wrist pins