Mounted on the transmission where the throwout bearing slides on
Mounted on the transmission where the throwout bearing slides on
Includes the required hardware to secure your new flywheel and pressure plate
10X Entries For Our 25th Anniversary Sweepstakes!
Engine codes ATW & AWM
This product was last offered at the strikethrough price on
05-02-2026
Used to secure the clutch master cylinder to the clutch pedal
Recommended to be replaced with the clutch
We Price Match - Give Us A Call or Chat!
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Custom 034Motorsport Aluminum Flywheel for the Longitudinal Mount VR6 Mated to the Audi 01A/01E Transmission.
*Conversion Flywheel - To be used in VR6 engine swaps mated to Audi 01A/01E transmissions only - Uses Audi I5 01A style Pilot bearing (not included) *
Handles up to 360 lb-ft of torque
Must be used with SACHS dual-mass flywheel #DMF91115.ES#4335
Designed for the daily-driven, weekend track warrior. Conservatively rated at 375ft/lbs.
For single mass flywheel
Designed for dedicated drag or drift cars. Conservatively rated at 520ft/lbs.
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for dedicated track cars. Conservatively rated at 445ft/lbs.
Works with stock flywheel
Designed for drag or drift cars that see limited street use. Conservatively rated at 525ft/lbs.
Includes flywheel
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for drag or drift cars that see limited street use. Conservatively rated at 455ft/lbs.
For single mass flywheel
Designed for high-powered street cars while capable enough to handle the track. Conservatively rated at 425ft/lbs.
Works with stock flywheel
Designed for track use while still streetable. Conservatively rated at 415ft/lbs.
For single mass flywheel