ID:.515" / OD:0.796" / 0.015" thick
Audi B5 Performance Engine & Drivetrain Parts
- Axles/Driveshafts
- Clutch / Flywheel Kits
- Cooling
- Differentials / LSDs
- Engine Internals
- Forced Induction
- Fuel / Ignition
- Intake Systems
- Intercoolers
- Mounts
- Oil Catch Can
- Performance Package
- Pulleys
- Short Shifters
- Skid Plate
- Software
- Throttle Controller
- Clearance
Full replacement kit for es1832445
A new washer and nut to install your pulley
10X Entries Into Our F80 M3 Sweepstakes
For use with Bosch style alternators
This product was last offered at the strikethrough price on
05-02-2026
Includes wrinkle black conversion plate -w- black 2.0T coils
10X Entries Into Our F80 M3 Sweepstakes
Fits ATW & AWM engine code models only
Includes wrinkle red conversion plate -w- black 2.0T coils and silver hold down kit
10X Entries Into Our F80 M3 Sweepstakes
Fits ATW & AWM engine code models only
Gain up to 16 horsepower and 17 lb-ft of torque on 91 Octane
This tune requires the vehicle to be dropped off at ECS Tuning's facility in Ohio and picked up the next
Custom 034Motorsport Aluminum Flywheel for the Longitudinal Mount VR6 Mated to the Audi 01A/01E Transmission.
2X Entries Into Our F80 M3 Sweepstakes
*Conversion Flywheel - To be used in VR6 engine swaps mated to Audi 01A/01E transmissions only - Uses Audi I5 01A style Pilot bearing (not included) *
Handles up to 360 lb-ft of torque
Must be used with SACHS dual-mass flywheel #DMF91115.ES#4335
Also referred to as the propeller shaft
Designed for dedicated drag or drift cars. Conservatively rated at 520ft/lbs.
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for drag or drift cars that see limited street use. Conservatively rated at 525ft/lbs.
Includes flywheel
Transform your 2.7-liter Bi-Turbo into a high-horsepower powerhouse with this complete BorgWarner K04 upgrade bundle.
RS4/modified intake pipes necessary for a complete install - For a bolt-on solution, please see 034Motorsport's inlet pipe kit 034-145-P002 (ES2864575).
Give your engine a new spark.
For Vehicles with Engine Codes ATW and AEB (Bolt-In Style Ignition Coils)
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for builds with up to 350 FtLbf of torque