Designed for drag or drift cars that see limited street use. Conservatively rated at 365ft/lbs.
Works with stock dual mass flywheel
Designed for drag or drift cars that see limited street use. Conservatively rated at 365ft/lbs.
Works with stock dual mass flywheel
Makes installation of clutch components on any flywheel much easier
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Located between the engine and transmission
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-27-2026
Secures the flywheel to crankshaft. M10X1X22.3
We Price Match - Give Us A Call or Chat!
Engine codes ATW & AWM
Max-Gear is recommended for use in front or rear open differentials, manual transmissions, and lower gear units of marine engines that specify use of an API GL-5 or GL-4 fluid
Designed for the daily-driven, weekend track warrior. Conservatively rated at 280ft/lbs.
For use with single mass flywheel
Specifically designed to fit your 16mm transmission drain and check plug.
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Ideal for the spirited daily-driver. Rated at 265ft/lbs.
Works with stock dual mass flywheel
Recommended to be replaced with every clutch or flywheel job
Unleash hidden power by reducing rotational mass
For use with Spec clutch kits only
Install new hardware with your new parts. 8.4x15x1.6
Used in securing the transmission mounts to the vehicle
Recommended to be replaced with clutch service
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-27-2026
Weighing in at 9 lbs, allows for faster revving and easier rev matching when downshifting.
*For use with Audi B7 RS4 Clutch Kit - ES2550660*
Revive the response & feel of your transmission
10X Entries For Our 25th Anniversary Sweepstakes!
Replacement clutch kit for the RA4 Stage 1 conversion
Offers higher wet boiling point than DOT 4 fluid
2X Entries For Our 25th Anniversary Sweepstakes!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-27-2026
CNC Machined from T6-6061 aircraft aluminum and designed to eliminate excessive engine and transmission torsional movement.