ECS News

Whether you're looking for just a few millimeters to clear a brake kit or going for the all-out stance effect, the superb ECS Wheel Spacers allow you to dial in your desired stance. Want easier wheel swaps or the ability to use varying length wheel spacers without having to swap bolts? Both conical & ball seat lug conversion kits are a great option. You have to park in a bad part of town? Give your anxiety a break with ECS Wheel Lock Kits! At ECS Tuning, an abundance of wheel spacing, adapting, and locking solutions are available.

Wheel bearings will need replaced for a number of reasons, the most common being normal wear. If there is a loud metal-to-metal noise while driving, it's likely that the bearing has failed. A simple way to check your bearing is to lift the wheel off the ground and try to move the tire back and forth, by pushing the top and bottom of the tire in. If there is play, this commonly means the wheel bearing has failed.

Wires clutter the interior of your vehicle and can be a major distraction if you attempt to plug your phone in while driving. Add wireless charging to your vehicle while maintaining a clean factory look with Inbay Wireless Charging. Installing discreetly behind the center console cubby, installation is as simple as tapping into a nearby 12v power source with the included wiring harness.

The cooling system in any car is often a neglected when it comes to maintenance, by the time most owners do something about this failure has already arrived. The recommended service interval is every 2 years. Just like engine oil the additives used in coolant to keep corrosion down and maintain proper lubrication breakdown in the same way over time and milage. Reduce the cost later by keeping your cooling system healthy now, Schwaben tools make it easy to maintain.

The easiest, most transformational modification for your Audi is a set of new, perfectly selected wheels. With new wheels offered from 5 great brands, you can be sure to find the perfect style that compliments your ride. Designed to bolt right up to your car, these wheels are available in different offsets and sizes to allow for the perfect fitment and finish. Of course, if you want to achieve an extreme look, don't forget to check out our large assortment of ECS Tuning wheel spacers and lug bolts.

It's hard not to appreciate the powerful, aggressive appearance of a wide-stanced performance car; it's the look that forces enthusiasts to take your ride seriously. The effect is typically accomplished with flared fenders and over-sized wheels, requiring increased fender clearance. The Schwaben fender roller tool is easy to use, priced right, and increases fender clearance while maintaining a factory-fresh look.

The combustion event inside the cylinder must be carefully controlled to realize maximum power and efficiency. Upgrade to the 2.0T ignition coils to ensure your fuel mixture burns rapidly, thoroughly, and reliably, while enhancing the beauty of your engine bay. The stage I ECS Kit includes everything needed for the conversion: stainless steel hardware and a 2.0T Coil Pack Conversion Plate (3 color options). The stage II Kit adds aluminum Coil Pack Hold Downs (3 color options) to keep pressure on the coil pack—a simple and attractive solution to coils popping out of location.

Milltek's Audi offerings exude the engineering rigor and attention to detail that comes from experience developing prototype exhaust designs in highly demanding circumstances for race teams throughout the world. Every single Milltek product offering is designed and manufactured in-house in the UK. Milltek tests each system on their own Dynamometer through many miles of subjective analysis, fine-tuning each component of each system for its specific application. Milltek's collaboration with ECS Tuning allows unprecedented access to these exceptional performance exhaust systems.

Rule #1: Use the right tool for the job. These brake system tools from Schwaben are essential for any brake system service to your German automobile. If your caliper pistons need to be simply pressed back in, or if they're threaded and require screwing back in, we've got the caliper piston tool you want. Bleeding your brakes? Our Schwaben brake bleeder wrench makes it so easy, you can even do it without having to remove your wheels! Make sure you're prepared with the right tool for the job with these brake tool essentials from Schwaben Tools.

Springtime is here and it’s time to get your toolbox in order. For 48 hours select Schwaben Tools are on sale to help you get into gear. The Schwaben hammers are built for a lifetime of use from top quality materials. Tighten nuts and bolts like a pro with a Schwaben torque wrench. Our 1/2-inch drive is great for general purpose repairs; the 3/8-drive wrench has a 5-80 ft-lb range for smaller jobs. The Schwaben 100-piece specialty bit set includes bits to fit a wide assortment of automotive fasteners, including triple square, tamper-proof Torx, tri-wing, and hex.

The weather in most areas is beginning to get nice. Don't let a busy life get in the way of your adventurous side. Rockymounts offers products to make this much needed escape as simple as loading up your bike and hitting the road to tranquility and adventure. With multiple designs and colors you can easily find the perfect mount to suit your vehicle. This isn't just a sale for bike and ski mounts, this is a sale on adventure and lasting memories.

Audi's double wishbone design provides accurate camber and toe control, handling prowess, and a world-class ride. If it's in shape, that is. Front suspension components are wear parts and must be replaced to insure proper geometry and suspension articulation. This 12-piece, OE-quality control arm kit includes all eight control arm assemblies, tie rod assemblies, stabilizer links, and new hardware. All arms come with factory installed ball joints and bushings, ready to bolt on. Solve creaks, clunks, and harrowing handling characteristics by servicing your front suspension soon.

Today's modern engines were made with complex tools that only dealerships seem to have on hand. This forces one to take their vehicle to a dealer in order to get routine service. Put the power in your hands with these new tools from Schwaben. Free yourself from the dealer and do more services yourself!

Driving season is right around the corner; Whether it's preventative maintenance, routine service, or buttoning up your seasonal project, don't wait until the eleventh hour to finish up your wintertime vehicle work. At ECS Tuning, we have the goods to get your vehicle back on the road. Assembled By ECS kits are offered in a large variety to mend nearly any ailing Audi. Get your project underway and spend your Spring behind the wheel!

Due to the location of your factory ignition coil pack harness and its close proximity to the exhaust manifold, it is common for the factory harness to become brittle and crack apart over time due to years of heat cycling. This can lead to misfires, rough idle, lack of acceleration, and decreased fuel mileage. ECS Tuning recognized this issue and put our R&D team to work to design a Ignition Coil Pack Harness Replacement Kit. This enables you to avoid repairing individual wires or buying the very expensive OEM engine harness. Check out our in-depth instructional PDF.

Milltek's Audi offerings exude the engineering rigor and attention to detail that come from experience developing prototype exhaust designs in highly demanding circumstances for race teams throughout the world. Every single Milltek product offering is designed and manufactured in-house in the UK. Milltek tests each system on their own Dynamometer through many miles of subjective analysis, fine tuning each component of each system for its specific application. Milltek's collaboration with ECS Tuning allows unprecedented access to these exceptional performance exhaust systems.

With the spring season right around the corner, we wanted to thank you for all of the hard work that you have put in over the winter. We have selected a handful of specialty tools from Schwaben to help get your project up and running before optimal driving weather is here. Sale Ends at 11:59 PM (EST) Friday March 2, 2018

Everyone has been in that position where there is barely enough light to get the job done right, in many cases we continue to complete the job blindly. Schwaben Underhood shop light is perfect for giving your vehicle a brighter future with its powerful LED lighting and ability to grab the hood permitting direct light to the engine bay. Looking for something a bit more handy, yet out of the way? The Schwaben droplight is perfect for always being there when you need it, but out of the way when you don't. Stop the low visibility frustrations and lighten up with Schwaben.

Available in tan, black, or gray to complement virtually any interior color, WeatherTech All-Weather Floor Mats have deeply sculpted channels designed to endure the harshest conditions. Next, these mats are coated in a protective, non-stick finish and equipped with anti-skid ridges to prevent shifting. Their proprietary engineered odorless resin ensures these mats won’t curl, crack, or harden in sub-zero weather. Finally, WeatherTech mats are manufactured in America to ISO 9001 standards for your quality assurance.

Are you spending some quality time with your car this Valentine's Day? Equip yourself for the occasion and make the most of your plans with Schwaben Tools & ECS Garage Gear! We offer an extensive line of standard & European specialty tools for your collection, as well as high quality items to help keep your car cleaner while getting work done and improve the DIY experience for both you and your tools.

Pop the hood to show off gorgeous carbon fiber, not dull plastic. Each ECS Carbon Fiber Engine Cover features a high gloss gel-coat finish on hand-laid carbon fiber and a reinforced fiberglass back. Designed by and produced exclusively for ECS Tuning, we can attest to the quality and fitment of these elegant Carbon Fiber Engine Covers. When you pop your hood, be sure what's underneath is worth looking at. ECS Carbon Fiber Covers make it so, with acres of gorgeous carbon fiber.

When it's time to do basic maintenance on your vehicle, it's much easier if you have everything that you need before you get started. When changing your oil, it's imperative that you get quality parts and components. After all, oil is what keeps your engine lubricated and combats premature wear. ECS offers a wide variety of oil service kits currently on sale now through 2/17/17. Don't quite need an oil change yet? Buy now, save later!

ECS Tuning proudly introduces our line of premium, corrosion-resistant rotors: GEOMET®. GEOMET® is a special coating containing metal oxides, zinc, and aluminum flakes, sprayed over the entire rotor surface to ensure complete coverage, and baked on at 600 degrees to form a durable and attractive silver-gray finish that fights rust far better than paints or other conventional coatings. You can expect your new GEOMET® rotors to outperform and outlast stock rotors, and look great behind your alloy wheels.

ECS tuning knows that Valentine's day represents a day of love and togetherness and we want to help. For most car nuts nothing is better than bringing your two loves together, working on your car and your significant other. The dream; getting some quality time together while turning a wrench, could be made into a date night in the garage. Already living the dream? Let Schwaben & ECS help you enjoy that quality time with specialty tools and smooth turning wrenches — The perfect torque specs for your relationship.

Schwaben Specialty tools has earned a reputation for producing exceptionally clever tools for a variety of difficult automotive projects. Their latest Wheel Essentials release contains superb examples of the Schwaben approach to premium tool design and manufacturing. The unique Protecta Socket Kit helps prevent damage during wheel installation & removal. Quickly measure bolt circle on wheels or hubs with the Schwaben Wheel Bolt Pattern Gauge. The Schwaben Low Profile Aluminum Floor Jack is loaded with design details that make this floor jack one of the best jacks on the market.

Check out the OEM 710N diverter valve for your Audi. Keep your boost inside the intake - where it belongs. Cure common driveability concerns with this stronger, more durable 710N valve. Diverter valves live in a tough neighborhood. By definition, they limit turbo boost, and most eventually fail due to a pin-hole or tear in the valve diaphragm. The 710N Valve is a diaphragm-based, factory upgrade for a lot of applications. The 710N valve was originally found on the TT225, and is known to have a tougher internal diaphragm that can withstand higher boost levels.

Turbo compressor surge is a harmful effect of boost pressure that is not released when the throttle body plate is closed. Thankfully Audi implemented a diverter valve to relieve pressure and keep your turbocharger safe. Over time your diverter valve can show signs of weakness and either stop working completely or leak, which both can have negative effects on your vehicle. If your diverter valve is on its last breath consider replacement sooner than later. We have a wide range of options for just about everyone's needs. We also have some great accessories as well!

The belly pans provided for modern Audi’s have always appeared to be under-engineered, out of place, cost-cutting parts. Many enthusiasts have chosen to run their cars without this protective cover entirely. This decision, however, ignores the unfortunate reality that the belly pan protects several critical engine and drivetrain components. ECS has a much more sensible solution – The Street Shield Skid Plate features corrosion resistant, 4mm thick 5052 aluminum, offering complete engine undercarriage protection.

Schwaben offers an extensive line of European specialty tools as well as standard tools to your collection. It doesn't stop there, we even offer items to help keep your car cleaner while getting work done and mobility for both you and your tools. See our perfectly bundled hand tool kits that make an excellent addition to any tool box.

Snap rings can be found everywhere, especially on cars. When you come across a snap ring in your repairs often times people use methods that are either not safe or may cause damage to the snap ring or other components. Snap ring pliers make it much easier, I guess you could say it makes the job a "snap". Schwaben offers these pliers in a 5-pc kit so you're completely prepared with multiple sizes and angles.