The worlds smallest universal regulator! Comes pre-set within precision tolerance to eliminate guesswork setting target pressure!
The worlds smallest universal regulator! Comes pre-set within precision tolerance to eliminate guesswork setting target pressure!
DV100001 optional blue spring for 23-30 psi
Call In Or Chat For Best Price!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-14-2026
Allows for -6AN connections for all inputs and outputs on the 034 FP34 Surge Tank
2X Entries Into Our F80 M3 Sweepstakes
+1mm oversized valve head diameter, single groove keeper setup for high RPM use
*Valves priced individually - For 1.8T - qty 8 needed / For 2.7T - qty 12 needed - Please see long description for additional valve seal/keeper informati
+1mm oversized valve head diameter, single groove keeper setup for high RPM use
*Valves priced individually - For 1.8T - qty 12 needed / For 2.7T - qty 18 needed - Please see long description for additional valve seal/keeper informa
Replacement springs for JHM 6 speed shifters.
All 6-speed JHM shifters (does not fit any non JHM shifters)
ID:.515" / OD:0.796" / 0.015" thick
Full replacement kit for es1832445
Includes wrinkle black conversion plate -w- black 2.0T coils
10X Entries Into Our F80 M3 Sweepstakes
Fits ATW & AWM engine code models only
Includes wrinkle red conversion plate -w- black 2.0T coils and silver hold down kit
10X Entries Into Our F80 M3 Sweepstakes
Fits ATW & AWM engine code models only
Custom 034Motorsport Aluminum Flywheel for the Longitudinal Mount VR6 Mated to the Audi 01A/01E Transmission.
2X Entries Into Our F80 M3 Sweepstakes
*Conversion Flywheel - To be used in VR6 engine swaps mated to Audi 01A/01E transmissions only - Uses Audi I5 01A style Pilot bearing (not included) *
Handles up to 360 lb-ft of torque
Must be used with SACHS dual-mass flywheel #DMF91115.ES#4335
Also referred to as the propeller shaft
Designed for dedicated drag or drift cars. Conservatively rated at 520ft/lbs.
Give your engine a new spark.
For Vehicles with Engine Codes ATW and AEB (Bolt-In Style Ignition Coils)
Designed for builds with up to 350 FtLbf of torque