Featuring a 4 puck ceramic disc and 12lb aluminum flywheel
10X Entries Into Our F80 M3 Sweepstakes
Featuring a 4 puck ceramic disc and 12lb aluminum flywheel
10X Entries Into Our F80 M3 Sweepstakes
Capable of approximately 1110NM (811FT LBS)!
Designed for dedicated track cars. Conservatively rated at 500ft/lbs.
Recommended to be used with South Bend Flywheel SBC0504
Designed for high-powered street cars while capable enough to handle the track. Conservatively rated at 480ft/lbs.
Works with stock flywheel
Featuring the 034Motorsport Billet Lightweight Flywheel, paired with a LUK OE B7 RS4 clutch kit, and associated hardware
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-29-2026
Includes high-clamp pressure plate and full-face organic clutch disc - Handles up to 400 lb-ft of torque
To be used in conjuction with factory flywheel and release bearing
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
Recommended to be used with South Bend Flywheel SBC0504
More holding power & a Kevlar lined disc
10X Entries Into Our F80 M3 Sweepstakes
Designed for the daily-driven, weekend track warrior. Conservatively rated at 400ft/lbs.
Works with stock flywheel
Offers more holding power with a full faced, multi-friction clutch disc - Holds up to 545 ft/lbs torque
Features the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc - 110% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels
Features the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc - 110% increased holding capacity
Featuring the Power Plus pressure plate paired with a sprung-hub dual friction Organic/Fiber Tough disc - 110% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels
Features a full faced, steel backed, pure kevlar sprung hub disc with a torque rating of 490 ft/lbs
Includes sprung hub clutch disc - To be used with Spec Single Mass Aluminum Flywheel - SA26A
Ideal for the spirited daily-driver. Rated at 350ft/lbs.
Works with stock flywheel
Designed for drag or drift cars that see limited street use. Conservatively rated at 525ft/lbs.
Includes flywheel