Replacement springs for JHM 6 speed shifters.
All 6-speed JHM shifters (does not fit any non JHM shifters)
Replacement springs for JHM 6 speed shifters.
All 6-speed JHM shifters (does not fit any non JHM shifters)
ID:.515" / OD:0.796" / 0.015" thick
Full replacement kit for es1832445
Does not include injectors - Gains of up to 55 HP & 100 LB-FT torque on 93 octane!
Call In Or Chat For Best Price!
This upgrade must be performed at ECS Tuning's facility in Ohio.
For existing Stage 1 customers upgrading to Stage 1+. Drive your vehicle to our location
Includes wrinkle black conversion plate -w- black 2.0T coils
10X Entries Into Our F80 M3 Sweepstakes
Designed to hold up to 445 ft/lbs of torque to the wheels with a sprung organic disc
10X Entries Into Our F80 M3 Sweepstakes
Includes wrinkle red conversion plate -w- black 2.0T coils and silver hold down kit
10X Entries Into Our F80 M3 Sweepstakes
Gain up to 16 horsepower and 14 lb-ft of torque on 91 Octane
This tune requires the vehicle to be dropped off at ECS Tuning's facility in Ohio and picked up the next
Handles up to 360 lb-ft of torque
Must be used with SACHS dual-mass flywheel #DMF91115.ES#4335
Replace your old, tired, hydraulic engine mount with BFI's proprietary bushing and bracket/Cup design
Replace your old, tired, hydraulic engine mount with BFI's proprietary bushing and bracket/Cup design
Designed for dedicated drag or drift cars. Conservatively rated at 520ft/lbs.
Matched set with connections
Designed for drag or drift cars that see limited street use. Conservatively rated at 470ft/lbs.
Includes single mass flywheel
Designed for dedicated drag or drift cars. Conservatively rated at 500ft/lbs.
Includes single mass flywheel
E85 Compatible
Requires tuning and/or additional hardware.