Taps in between manifold vacuum line to create a boost reference source - Includes clamps
10X Entries Into Our F80 M3 Sweepstakes
Taps in between manifold vacuum line to create a boost reference source - Includes clamps
10X Entries Into Our F80 M3 Sweepstakes
Lightweight flywheel with the S4 pressure plate and disc
Don't See A Bundle You Want - Give Us A Call Or Chat - We Will Make One!
This product was last offered at the strikethrough price on
05-05-2026
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Holds the driveshaft where it should be
For vehicles with 6HP19 transmissions (6 speed automatic)
Expertly matched performance Eibach Pro-line lowering springs and Bilstein shock/strut package for a dramatic increase in performance handling. World-famous Bilstein quality with a limited lifetime warranty!
10X Entries Into Our F80 M3 Sweepstakes
2X Entries For Our Spin To Win Sweepstakes!
Designed for high-powered street cars while capable enough to handle the track. Conservatively rated at 395ft/lbs.
Add the legendary performance of Koni shocks and struts to your Audi
Finally a low cost front Big Brake kit solution that uses the popular Porsche Cayenne caliper (6-piston Brembo).
More holding power & a Kevlar lined disc
10X Entries Into Our F80 M3 Sweepstakes
Replacement clutch kit for the RA4 Stage 3 conversion
Our Red Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries Into Our F80 M3 Sweepstakes
Up to VIN 8E-4-191000, split is in the 2004 model year
Includes high-clamp pressure plate and full-face organic clutch disc - Handles up to 400 lb-ft of torque
To be used in conjuction with factory flywheel and release bearing
Expertly matched performance Eibach Pro-line lowering springs and Bilstein shock/strut package for a dramatic increase in performance handling. World-famous Bilstein quality with a limited lifetime warranty!
10X Entries Into Our F80 M3 Sweepstakes
2X Entries For Our Spin To Win Sweepstakes!
Lowers an average of 30mm front and rear. Up to VIN 8E-2-400 000
High flow, stainless downpipe kit to be used with 2.5" aftermarket exhaust
Fits quattro 5-speed transmission models only - To be used with 2.5" aftermarket exhaust system
Includes everything you need to install spacers on two wheels
10X Entries Into Our F80 M3 Sweepstakes
Please measure your hub protrusion to ensure it will still make contact with the center of the wheel. See
This product was last offered at the strikethrough price on
06-13-2026