ECS News

We've all found ourselves using highly "creative" methods for separating old parts in the midst of an intense project. Some methods do work - usually at the expense of personal injury and a few broken or damaged parts. The new Remover Tools from Schwaben leave your knuckles and expensive parts intact. The new Exhaust Hanger Removal Tool has a slim profile for work in tight areas, easily pulling off hangers from behind. Steering and Suspension Ball Joint Separators offer a combined 12mm to 80mm jaw opening range. New rugged 3/8” drive Schwaben E-Socket Sets are also available.

Your German-engineered Audi transcends the conventional limitations imposed on typical performance cars. These vehicles spend hundreds of hours on the world's most famous test tracks, challenging the most talented and devoted automotive engineers. Only a company that shares this passion for moving the limits of performance higher can successfully contribute technological innovations to this caliber of automobile. H&R has dedicated almost four decades to suspension engineering. 100% German made, H&R Performance Suspension Kits deliver race-inspired driving dynamics to your A4.

Add bragging rights and personal satisfaction to your Audi RS5 experience; do your own recommended maintenance at major and minor intervals. From engine oil and filter changes to spark plug replacement, ECS Tuning makes it easy to keep your RS5 Audi-perfect. We've assembled a complete line of high quality maintenance service kits to serve your exact needs. Face it; no one cares more about your RS5 than you!

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-Compliant tailored hoses come with OE attachment fittings and sealing washers.

Wheel bearings are one of the most crucial components of a car's suspension. Located in the wheel hub, brake drum, or rotor itself, the bearings support the full weight of the vehicle while allowing the wheels to rotate smoothly within a steel enclosure. Dysfunctional bearings are simply the result of the rigors of daily driving, and should be replaced at the first sign of failure. Worn bearing symptoms range from loud noise emanating from the wheel hubs to rough ride characteristics. ECS presents several bearing solutions as well as an invaluable installation kit.

Our complete Stage 3 Front Big Brake Kit for your B8 A5 mates massive six-piston Porsche 19Z calipers with ECS engineered large diameter, 2-piece, cross-drilled and slotted, directionally vented rotors. Install them with ease using our in-house engineered, anodized caliper brackets that perfectly match the calipers to your steering knuckles. Follow that up with Exact-Fit stainless steel brake lines to feed those enormous calipers without expansion, giving you a solid pedal feel. The installation kit includes everything you need, from fasteners to fluid to bolts to brackets.

Browsing through our world-class parts catalog can be overwhelming - with such a deep well of heart-pounding performance additions, convenient tools and accessories, and limitless OEM replacement parts, you'll need a way to control your lustful thoughts this Valentine's Day. ECS helps you cool off with the Wish List tool - setup a vehicle make and model, and click on the "Heart" logo next to any product that catches your eye. And if you're looking to spice things up this holiday with a thoughtful gift, $10-$100 ECS gift cards will make your sweetheart's wishes come true.

Schwaben Specialty Tools has released three new products that eliminate the pains and inconveniences associated with automotive repairs and installations. Get off the ground and move around with the Six Wheel Creeper - ruggedly designed to reliably keep your body off the ground while working underneath your Euro. The Schwaben LED Under Hood Shop Light features 120 LEDs & a polycarbonate transparent lens that instantly illuminates every crevice of your engine bay. The Rolling Creeper Seat and Tray keeps your body at an ideal height while keeping your tools close at hand.

Changing the suspension setup on a refined German car often times feels like meddling with perfection. With an advanced, highly wrought coilover system, you can be confident your addition is a reliable improvement. ST coilovers by KW are made of high grade, galvanized steel, and come with a 5 year limited warranty. Utilizing engineering tailored specifically to your Audi B8 A4, ST X full height adjustability and preset damping provide the perfect balance between performance and ride comfort.

Changing the suspension setup on a refined German car often times feels like meddling with perfection. With an advanced, highly wrought coilover system, you can be confident your addition is a reliable improvement. ST coilovers by KW are made of high grade, galvanized steel, and come with a 5 year limited warranty. Utilizing engineering tailored specifically to your Audi B8 A5, ST X full height adjustability and preset damping provide the perfect balance between performance and ride comfort.

Audi RS-line vehicles transcend the conventional limitations imposed on street performance cars. These vehicles spend hundreds of hours on the world's most famous test tracks, challenging the most talented and devoted automotive engineers. Only a company that shares this passion for moving the limits of performance higher can successfully contribute technological innovations to this caliber of automobile. H&R has dedicated almost four decades to suspension engineering. 100% German made, H&R Performance Suspension Kits deliver race-inspired driving dynamics to your RS5.

Our complete Stage 3 Front Big Brake Kit for your B8 A4 mates massive six-piston Porsche 19Z calipers with ECS engineered large diameter, 2-piece, cross-drilled and slotted, directionally vented rotors. Install them with ease using our in-house engineered, anodized caliper brackets that perfectly match the calipers to your steering knuckles. Follow that up with Exact-Fit stainless steel brake lines to feed those enormous calipers without expansion, giving you a solid pedal feel. The installation kit includes everything you need, from fasteners to fluid to bolts to brackets.

Upgrade your exterior lighting and rid yourself of the amber turn signals found on US spec headlights. Halogen E-Code headlamp assemblies for your B8 A5 produce a wider European beam pattern and eliminate the amber corner markers found on US-spec models.

Audi chose to offer a completely digital method of monitoring and displaying the engine oil level. Enthusiasts have found that this method, while convenient for the average driver, lacks the assurance of the traditional hands-on approach to checking oil. Your Audi is already prepared to accept the original dipstick method - the installation location is simply blocked off. ECS now offers a genuine Audi Engine Oil Dipstick, allowing you to remove the factory plug and easily replace it with the high-quality OEM dipstick.

Motorsport inspired Carbon Fiber Mirror Covers from ECS Tuning will give your Audi an exterior styling boost that will surely turn heads. Carefully custom wrapped in carbon fiber and given a glossy clear protective finish, this styling statement complements any color Audi. Let carbon fiber mirror covers from ECS reflect your good taste.

When it comes to the cooling system, we're led to only think of failure with overheating in the warmer months of the year. On the other hand, coolant prevents freezing within its system during the colder months, and there are still many that are unequipped to service their system properly. Don't get left in the cold. Maintain your cooling system the right way and keep it fully functional with these cooling system tools.

Automotive electrical work demands patience, knowledge, & above all, the correct tools. European car owners oftentimes find themselves using ineffective, dangerous, & cumbersome methods when repairing or replacing wiring harness connectors. Schwaben's latest release, the European Car Electrical Terminal Tool Kit, gives enthusiasts the exact tools required for bullet connectors, common ABS sensor and power connectors, trailer light plugs, and more. Extend harness life, ensure proper diagnostic equipment connectivity, and preserve wiring harness life with this superb release.

Audi chose to offer a completely digital method of monitoring and displaying the engine oil level. Enthusiasts have found that this method, while convenient for the average driver, lacks the assurance of the traditional hands-on approach to checking oil. Your Audi is already prepared to accept the original dipstick method - the installation location is simply blocked off. ECS now offers a genuine Audi Engine Oil Dipstick, allowing you to remove the factory plug and easily replace it with the high-quality OEM dipstick.

A great way to clean up the front of your B8 A4 is by replacing the damaged factory fog lamp housings. Condensation and external wear quickly ages this part, dating your vehicle. The TYC fog lamp housings are simple to install and will immediately take years off your Audi. *Does not include bulbs

ECS Tuning introduces a innovative way to install a boost gauge into your Audi B8 2.0T . Designed specifically for the B8 chassis, this electronically-actuated gauge allows for easy and accurate monitoring of turbocharger boost pressure. Keeping track of boost pressure is a great way of consistently checking engine performance and a fantastic way to diagnose power loss problems. The gauge design and lighting blend with other dash gauges to give it a classy, factory-installed look. We've even prepared a detailed photo tutorial outlining the installation.

ECS Tuning introduces a innovative way to install a boost gauge into your Audi B8 2.0T . Designed specifically for the B8 chassis, this electronically-actuated gauge allows for easy and accurate monitoring of turbocharger boost pressure. Keeping track of boost pressure is a great way of consistently checking engine performance and a fantastic way to diagnose power loss problems. The gauge design and lighting blend with other dash gauges to give it a classy, factory-installed look. We've even prepared a detailed photo tutorial outlining the installation.

It's hard not to appreciate the powerful, aggressive appearance of a wide-stanced performance car; it's the look that forces enthusiasts to take your ride seriously. The effect is typically accomplished with flared fenders and over-sized wheels, requiring increased fender clearance. The Eastwood fender roller tool is easy to use, priced right, and increases fender clearance while maintaining a factory-fresh look. Kits are available that include a heat gun to keep your finish from stress cracking, & a finishing tool to form the inner fender lip for a professional-quality job.

The growing Schwaben Tool catalog has just expanded again with the release of the superbly engineered, exceptionally reliable Schwaben hand tools - now available from ECS tuning. The new Schwaben 1/2" breaker bar has a full 180°swing for those hard to reach bolts and nuts. A complete set of Schwaben twelve-point metric combination wrenches from 8 to 19 mm is also available. Mechanic-quality 290mm and 200mm long ratchets featuring a durable fine satin finish round off this latest premium tool release.

Critical emergency parts should be purchased from a well-known, reliable company. High quality Booster cables are now available from Schwaben Tools. The 6-gauge copper, multi-strand cables are 12 feet long, making the emergency jump start hassle-free in any situation. Rated at 400 Amps, the vinyl-coated Schwaben cables are designed to last.

If you spend time and money renewing your brake hardware and linings, you ought to consider upgrading to ECS Tuning Exact-Fit brake hoses, and do the job right. These premium brake hoses are stronger, more durable, and better protected than the originals. They are shielded in stainless steel mesh reinforcement, and coated with bright red vinyl for added protection. Available by the axle for front or rear, or as a complete vehicle set, our DOT-Compliant tailored hoses come with OE attachment fittings and sealing washers.

Let your A4 look great after hours with new LED lighting upgrades from Ziza. This complete interior lighting kit includes bulbs for the vanity lights, trunk lights, front dome lines, rear dome lights, and glove box lights. Install our complete interior lighting package and banish dirty yellow light from your interior, once and for all. These wedge- or festoon-style LEDs are as easy to install as standard bulbs. Their improved illumination and upscale look will be a welcoming addition to any interior.

When the 2.0T engine was introduced, the rubber diaphragm in the original diverter valve failed regularly, even at stock boost levels. The improved “D” diverter valve has a piston valve design that eliminates the original, failure-prone rubber diaphragm. Spend more time driving, less time fixing!

If you're planning on incorporating any vacuum-assisted accessories into your B8 A4 2.0T, you will need a reliable pressure reading from your engine. ECS engineers have again arrived at a simple, durable, and tasteful billet aluminum piece to suit your needs. The ECS Boost Tap clips in between your PCV hose and intake manifold, giving you up to two inlets for your creative use. The kit includes all hardware and a set screw for blocking off the unused inlet when only one vacuum port is required for a particular application

Keep your cuts clean and your connections clamped tight with these new Schwaben tools. The CV boot clamp pliers will assist in maintaining the factory look by utilizing ear-type clamps found on CV axle boots, vacuum lines, and fuel lines right from the factory. The Schwaben mini tube cutter will cut hardlines with a smooth, straight finish making it easy to flare and fit. For the enthusiasts looking to complete a job, and leave it with the appearance that it was never touched.

Coming to a finish of an under-the-hood project is a sight that any enthusiast can enjoy. The other finish we enjoy the sight of is the paint finish, unblemished and grease free. The best way to ensure you maintain this appearance while working under the hood is with a fender cover. The ECS Magnetic fender cover features Soft magnets to hold tight in place, soft non-scratch leather on the front, and goose flannelette backing. Don't risk it, stay covered.