Gains up to 64Hp --- 265hp/327lb-ft (93 octane)
Call In Or Chat For Best Price!
This upgrade must be performed at ECS Tuning's facility in Ohio.
Up to the 2012 model year.
Gains up to 64Hp --- 265hp/327lb-ft (93 octane)
Call In Or Chat For Best Price!
This upgrade must be performed at ECS Tuning's facility in Ohio.
Up to the 2012 model year.
Gains up to 57HP & 85TQ on 93 Octane, 85HP & 134TQ on E85
Call In Or Chat For Best Price!
This upgrade must be performed at ECS Tuning's facility in Ohio.
From the 2013 model year.
Unitronic's Supercharger Pulley Upgrade effectively raises boost levels by increasing the speed in which the supercharger spins.
Add a better flowing, stronger set of hoses to your vehicle and keep it running strong.
Includes oversized silicone pipes for the intercooler inlet and outlet
10X Entries Into Our F80 M3 Sweepstakes
For use with the OEM intercooler
This product was last offered at the strikethrough price on
06-13-2026
Get up to +50 hp and +52 lb-ft through a safe and easy to use tuning module from RaceChip
For vehicles from the 2014 model year only
The filter element deserves to be well looked after and be a part of your regular maintenance schedule.
Includes closed air box, air ducting, PowerCore filter, and necessary hardware
Spin the supercharger faster without affecting the accessory drive system
10X Entries Into Our F80 M3 Sweepstakes
Appropriate stage 2 software is required for use
This product was last offered at the strikethrough price on
08-31-2026
Total solution for replacing and upgrading your notoriously weak stock engine mounts for your B8 / B8.5 Audi.
Larger diameter pulley increases the speed at which the supercharger spins, increasing the boost pressure output
*NOTE: This kit must be used with appropriate "Stage 2" performance software.
Cure your leaking valve problems for good!
Drop in intake to upgrade your B8 2.0T
For Facelift models from the 2012 model year and up
Includes closed air box, air ducting, PowerCore filter, and necessary hardware
Fits models up through the 2012 model year (Pre-Facelift)
Increases diameter of factory pulley from ~162mm to ~187mm, which in turn spins the supercharger ~15.4% faster!
Call In Or Chat For Best Price!
APR Stage II software is required to run any upgraded Pulley configuration and is sold separately - Pleas
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-16-2026
Install kit used for APR MS100035
Call In Or Chat For Best Price!
To be used for APR Supercharger Drive Pulley Upgrade MS100135
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-16-2026