Rebuild kit for the 034Motorsport adjustable front sway bar
Rebuild kit for the 034Motorsport adjustable front sway bar
Average of 20mm (.7inches) lowering front and rear
Trimming of bumpstops required.
Solid spherical bushings and adjustable lengths for perfectly dialed in camber settings. Adjustment range of +/-3.00 Degrees
Properly lubricate your SuperPro polyurethane bushings
These rebound extensions aim to make adjusting your coilovers more accessible
These rebound extensions aim to make adjusting your coilovers more accessible and are availablie in a variey of sizes. Be sure to verify the correct size of the piston rod hex before ordering.
Improves handling and control - upgrade to a more engaging driving experience
This rebuild kit contains new Dynamic+ Rod Ends, Jamb Nuts, Anti-Seize, and accompanying nuts and washers.
Easily control all of your RGB LED's from one place!
Rebuild kit for the 034Motorsport adjustable rear sway bar
This bolt and nut replacement kit has a 720 hour salt spray certified coating
Pinch bolt for upper control arms - Secures ball joints to the top of the knuckle
Allow your B9 Audi to sit on the ground!
For vehicles with 48.5mm front lower mounts
Choose your struts, management, tank option and more
For vehicles with 53mm front lower mounts
Choose your struts, management, tank option and more
For vehicles with 53mm front lower mounts
Featuring 30 levels of adjustment and performance spring rates and valving
For vehicles with production date from 7/12/2016 with 48.5mm front strut body with factory Electronic Damping Control.
Featuring 30 levels of adjustment and performance spring rates and valving
Please allow 4-6 weeks for build time
For vehicles with production date up to 7/11/2016 with 53mm front strut body without factory Electronic Damping Control.