Weighing in at approximately 215 grams the added inertial mass makes shifting effort substantially less while speeding up the process at the same time.
Weighing in at approximately 215 grams the added inertial mass makes shifting effort substantially less while speeding up the process at the same time.
Secured to the haldex assembly
2X Entries For Our 25th Anniversary Sweepstakes!
2X Entries For Our G87 M2 Sweepstakes!
Fits the left or right side and includes necessary hardware
Up to VIN 8N-1-046000, split is in the 2001 model year
This product was last offered at the strikethrough price on
07-27-2026
Includes ECS Polyurethane Dogbone Insert Bushings, Engine and Trans Mounts & Installation Hardware
10X Entries For Our 25th Anniversary Sweepstakes!
Ideal combination for Race or High Performance Street Vehicles
Commonly found as a drain or fill plug. M10x1x10
Used as the fill plug for Haldex
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-02-2026
Put all your power to the ground!
Everything required to service your haldex, recommended at every 40K miles. Includes Genuine filter and Febi oil.
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
07-31-2026
Fits the front or rear position of the center propeller shaft (front-to-rear driveshaft)
*Please Note: We recommend visually verifying the CV joint on your factory center driveshaft and spline count/type prior to ordering. GKN lists these as
This product was last offered at the strikethrough price on
07-26-2026
Replace your stretch bolts for proper tightening.
This product was last offered at the strikethrough price on
02-24-2026
Install new hardware with your new parts. (M10x52)
Secures the axle assembly to the transmission from the 2003 model year
Install new hardware with your new parts. M8x48
2X Entries For Our 25th Anniversary Sweepstakes!
We Price Match - Give Us A Call or Chat!
Secures the axle assemblies to the rear differential flanges
Three bushing kit with hardware to reduce wheel hop
10X Entries For Our 25th Anniversary Sweepstakes!
For use with OEM dogbone mount only
This product was last offered at the strikethrough price on
06-13-2026
Designed for the daily-driven, weekend track warrior. Conservatively rated at 400ft/lbs.
Works with stock dual mass flywheel
Holds the driveshaft where it should be. Isolation dampers minimize vibrations.
Harness engine torque and put the power to the ground!
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Put all your power to the ground!