Increased displacement to 3.0 liters is accomplished by using a larger 92.8mm stroke crankshaft and 154X21 connecting rod.
Requires Audi factory 3.0L 30V (AVK) crankshaft & IE 154x21 Forged Connecting Rods
82mm bore (oversized), 9.0:1 compression ratio, 86.4mm stroke - includes rings, wrist-pins, & circlips
+1mm bore size: Overbore pistons require additional machine work including a cylinder bore and hone, this work must be performed by a machine shop
82.5mm bore (oversized), 9.0:1 compression ratio, 86.4mm stroke - includes rings, wrist-pins, & circlips
+1.5mm bore size: Overbore pistons require additional machine work including a cylinder bore and hone, this work must be performed by a machine shop
81.5mm bore (oversized), 9.0:1 compression ratio, 86.4mm stroke- includes rings, wrist-pins, & circlips
+.5mm bore size: Overbore pistons require additional machine work including a cylinder bore and hone, this work must be performed by a machine shop
Includes rings, wire locks, and 23mm wrist pins - 83.0mm bore (0.5mm overbore), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
Lifetime Replacement
