BMW E90 335xi N55 3.0L Performance Engine & Drivetrain Parts
- Axles/Driveshafts
- Clutch / Flywheel Kits
- Cooling
- Differentials / LSDs
- Engine Internals
- Forced Induction
- Fuel / Ignition
- Intake Systems
- Intercoolers
- Mounts
- Nitrous Systems
- Oil Catch Can
- Pulleys
- Short Shifters
- Skid Plate
- Software
- Throttle Controller
- Clearance
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-01-2026
Two assembled motor mounts with removeable poly bushings!
Performance and Reliability with the Powerflex Clutch Fork Pivot Pin
Plug & play power — gain up to 60 horsepower on a stock car, 100+ horsepower on a modified car! For 2011 model year vehicles or older.
Not for sale or use in the state of California.
Increased fueling for bigger power - supports up to 575whp!
Replace your failure-prone rubber coolant outlet hose with a durable, long-lasting silicone solution!
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
South Bend Clutch Stage 3 Daily Driver Clutch Kit Rated for 500 Ft/Lbs
For Use with SMF
For Vehicles with production date from 2007
Designed for daily use. Rated for 500ft/lbs
For Vehicles with production date from 2007
Replace those Worn Out Main Bearings!
+0.25mm
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-08-2026
4X more spark energy than stock coils!
Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in pack of 6 units - Minimum flow of 1600cc @ 3bar (43.5 PSI industry standard)
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injection kits only
1959 cfm. High performance pusher fan with curved blades.
Designed for dedicated track vehicles.
Increased fueling for bigger power - Supports up to 1150whp!
New billet thermostat cover, hardware and gasket. Featuring a low temp thermostat - 40 degrees Celsius/ 72 degrees Fahrenheit lower than factory.
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
05-02-2026