Supports the shifter lever inside the shifter arm
2X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Supports the shifter lever inside the shifter arm
2X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Upgraded clutch plate and Ceramic Lined Sprung Disc For Use With Aftermarket Single Mass Flywheel
For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Should be replaced during fluid replacement. M24X1.5.
Fill and drain plug for vehicles with transmission code S5D320Z and production date up to 03/2003
Easily align your clutch disc for installation with this Kingsborne tool
Uses stock replacement disc
We Price Match - Give Us A Call or Chat!
Designed for track use while still streetable. Conservatively rated at 385ft/lbs.
For use with single mass flywheels
Designed for track use while still streetable. Conservatively rated at 385ft/lbs.
For use with single mass flywheels
Full Face Organic/Ceramic Spring Disc. Includes throw-out bearing, alignment tool and pilot bushing.
95A Street/Track - Green
Have a humming noise coming for your rear wheels? This very well could be your solution.
This product was last offered at the strikethrough price on
06-15-2026
Fits left and right side
More holding power with a sprung organic/fiber tough disc Designed for Aftermarket Single Mass Flywheel
For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
More holding power with a Rigid organic/fiber tough disc Designed for OE Dual Mass Flywheel
For Vehicles with S5D250G-TAJS Transmission (5-Speed with 10-Spline Input Shaft)
For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft
Designed for the daily-driven, weekend track warrior. Conservatively rated at 330ft/lbs.
For use with dual mass flywheels
Designed for the daily-driven, weekend track warrior. Conservatively rated at 330ft/lbs.
For use with single mass flywheels
14.5mm diameter