ECS News

ECS now offers a superbly matched wheel and tire set from legendary MINI tuner JCW. The 18-inch double-spoke wheels are finished in either matte black or bright silver and are wrapped with Pirelli P Zero asymmetrical Run Flat High performance tires. The combination not only perfectly complements any MINI's styling, but offers fitment, quality, and performance only possible through JCW. The balanced wheels with MINI JCW center caps arrive ready to mount - just fill with air and drive. JCW 4 Piston Brake kits will need 5mm spacer.

By now, sun and the elements have likely tarnished and damaged your MINI's cowl covers. Once a dark matte black finish, they have probably faded to gray, requiring constant attention to keep your vehicle's exterior looking clean. ECS now offers the URO Chrome Cowl Cover Grille Set for your R50/R53 Cooper/Cooper S/JCW, adding a tasteful chromed-out element to your exterior. The covers come already prepared with quality adhesive, easily securing to the factory units and instantly refreshing your MINI's cowl covers for a clean finish.

For track-ready cars like the R50, R52, R53, suspension adjustments yield huge gains in handling characteristics. SPC Performance Adjustable Rear Control Arms are an excellent investment for the MINI owner looking to dial in a more aggressive camber specification, keeping the tire contact patch more parallel with the road surface during hard cornering when traction is most needed. The beautiful silver-anodized finished arms coupled with SPC "Red" nuts provide a full +/- 4.0 degrees of rear camber adjustment, giving you needed control over this critical parameter.

KONl shock absorbers with Frequency Selective Damping (FSD) technology, have been specifically designed for the MINI R50, representing the ultimate in comfort and road-holding. The purely mechanical shocks and struts are independent of electronic control components, making installation easier and product life significantly longer. KONl FSD suspensions contain an added special valve that controls a parallel oil flow next to the piston, dramatically improving ride quality. And by retaining the factory ride height, your MINI's wheel fitment & stance will remain unchanged.

A sticking or broken hood cable is not only a pain when it comes time to service your engine; the issue also presents a significant risk to your driving safety. Over time, corrosion can cause the release to seize, potentially making it impossible to even open your hood. ECS now offers the genuine MINI Hood Release Kit, including each part required for the complete job; Bowden cables, left and right side locking latches, and a hood unlocking lever.

The primary appeal of new wheels is in the new, shiny appearance they offer. The majority of the time, a different style, size, or color isn't really the ultimate goal. With such a deep catalog of staggeringly effective wheel cleaning and restoration products from specialists Sonax and Chemical Guys, getting what you really want from your wheel setup is fast and easy - and it's all available now from ECS. Acid-free and pH balanced rim and wheel cleaners effortlessly dissolve grease, brake dust and dirt, while safely preserving your wheel's finish.

The most popular spring in H&R's line-up, Sport Springs will lower your MINI an average of 1.4 inches for a lower center of gravity, improved handling, and a more aggressive appearance. Sport springs are an excellent choice for street and occasional track use, featuring a spring rate that is firmer than the OE Sport spring but still comfortable enough for daily use. Lowering : 1.4 Front / 1.4 Rear

This wood dash pattern for the three piece dash adds a little classic Mini tradition to your MINI. Dash is in plastic with high gloss burl wood pattern. This addition is easy to install and matches other wood accessories. Snaps right into dash once old section is removed. This kit comes with left main section ( driver ) , center section, and right main section ( passenger ) to complete the 3 piece wood dash look. No airbags covers to worry about.

A frequent dilemma when fitting an upgraded seat belt to track-prepared street cars is how to balance the needs of daily driving with the demands of performance driving. A dedicated track-day setup is typically impractical, while running without a substantial harness forces the driver to use the steering wheel to hold themselves in place. Schroth Racing Quick Fit Harnesses are fully reversible and anchor to the factory seat belt pre-tensioner, allowing the airbags to deploy as the MINI engineers intended. Both left (driver) and right (passenger) harnesses are available.

Schwaben products are characterized by simple, clever designs. Their wheel storage solutions may be the best examples of these qualities. The Schwaben Wheel Tree holds up to 275lbs and allows you to safely stack your wheels without the risk of scuffing and scratching. Convenient locking casters allow you to easily move the whole set anywhere in your garage or shop at one time. And when saving floor space is the highest priority, the Schwaben Wall-Mounted Wheel Rack allows you to securely store up to four 11½" wide wheels and tires against the wall, away from your work space.

The lowered ride height achieved by upgrading your factory suspension is a consequence of the modification, not its purpose. With this knowledge, you can appreciate the value of more finely wrought suspension designs, like those from ST. The ST X Performance Coilovers utilize tempered high-strength springs, hardened chrome piston rods, and galvanized zinc-plated strut housings - a consequence of which is a powerful, aggressive stance. But the enduring value of this arrangement lay in its durability, reliability, and reverence for precise engineering.

Your wheels and tires require a little extra care and attention, especially during storage. ECS offers several smart & simple storage solutions, specifically designed for your MINI. The Schwaben Wheel & Tire Rack saves your floor space, securely mounting your wheels & tires on the wall. Finally, MINI Tire Totes help to maintain a clean & organized workshop, while making wheels & tires easy to carry

Don't let conventional spacer options leave you feeling down & out. ECS bolt-on wheel spacers are the right way to push your wheels out to the fenders. These precision-machined, 6061-T6 anodized black aluminum spacers have 4140 integral steel threads. Forget the perils of sourcing the correct extra-long wheel bolts; each ECS Spacer Kit includes the required longer bolts in factory-look black for safe & precise fitment. Additionally, the hubcentric design centers the spacer perfectly on the wheel hub, eliminating the shaking & wobbling at speed characteristic of inferior spacers.

Avoid finding yourself without a key trim fastener - stock up for good with the Vaico BMW/MINI Fastener Assortment Kit. Designed with the DIY enthusiast or body shop in mind, this assortment comes stocked with clips for fender liners, interior trim, and body mouldings, all in a convenient storage case.

Don't let conventional spacer options leave you feeling down and out. ECS bolt-on wheel spacers are the right way to push your wheels out to the fenders. These precision machined, 6061-T6 anodized black aluminum spacers have 4140 integral steel threads. Forget the perils of extra-long wheel bolts; these come complete with all the low profile bolts needed to properly torque the spacers to the hub in factory looking black and your wheels to the spacers. ECS bolt-on spacers will have your car sitting just wide.

A distinctive feature of the later Gen 1 MINI is the HID projector headlights. The chrome ring and black housing gives the car a more luxurious appeal while improving driving visibility. Bring this styling and performance upgrade to your R50/R52/R53 MINI with the Helix Projector Blackout Headlights. Featuring plastic lenses with a blackout matte housing, chrome reflective backing, and chrome exterior rings, the plug-and-play kit includes both left and right headlights and utilizes H7 high and low beams.

When John Cooper Works designed the limited-edition GP for MINI, they wanted to prove that the MINI chassis is not only befitting the most advanced track-oriented technology, but also that it deserves the interior styling of a pure-bred racer. Their efforts produced a stunning contrast-stitched shifter boot, down tubes, and emergency brake boot. Bring this exact same redesign to your MINI's cabin using direct fit, authentic John Cooper Works parts.

Quit fussing with wood blocks, ramps, and the like with the Schwaben Low Boy floor jack. The Low Boy is low-profile, allowing you to sneak it under the ground-hugging rockers on your lowered car. Constructed of lightweight aluminum, this floor jack features a front central roller for increased ease of use and maneuverability. If you work on your car, you'll be doing some lifting. Get the right equipment with the Schwaben Low Boy floor jack, a great compliment to the other Schwaben tools in your arsenal. Atta' Boy.

They just look HID. But Ziza H11 bulbs are street legal, and do not require special wiring when used in your MINI. Available in Platinum White, Pure Yellow, and Super White, Ziza H11 bulbs plug into many standard headlight and fog light sockets. Known for their brighter light, these special bulbs give your car a stylish look, and improve your vision in both low visibility and night driving conditions.

They just look HID. But Ziza H7 bulbs are street legal, and do not require special wiring when used in your MINI. Available in Platinum White, Pure Yellow, and Super White, Ziza H7 bulbs plug into many standard headlight and fog light sockets. Known for their brighter light, these special bulbs give your car a stylish look, and improve your vision in both low visibility and night driving conditions.

Small pleasures make life fun. Take your MINI; small in size, big on looks. Why not sprinkle a little added flavor over that small pleasure with a set of bright white LEDs for the front marker lights. This is another bright idea from Ziza.

Guesswork is expensive. It leads to costly repair errors that compromise vehicle safety. Talented pro-sumer or repair professional, you need accurate vehicle data and specifications. That's why ECS is happy to offer an entire inventory of Bentley manuals, a reliable, respected source of repair data for many European vehicles. This comprehensive source of info on your MINI has been carefully edited and illustrated. A worthwhile investment.

Fresh coolant is paramount to safe & reliable engine operation. Unfortunately, the process of bleeding air out of your cooling system during a coolant refresh is tedious and therefore often neglected. ECS offers a highly convenient solution to the tedium & frustration associated with a coolant servicing – the Schwaben Coolant Evacuation Kit. The unique kit resolves several common cooling system issues: - No heat, overheating, or erratic temperature gauge readings after a cooling system service - Problems with coolant uptake or circulation - Cooling system leaks

The strut tower for the MINI Cooper was designed to adequately support the stresses and forces encountered during typical daily driving. Aging models or vehicles that are routinely pushed past the limitations of the chassis oftentimes experience strut tower deformation, compromising the crisp and responsive handling that defines every MINI. Machined from 15mm thick 6061-T6 aluminum, ECS Strut Tower Plate Kits eliminate the prospect of tower mushrooming while improving chassis rigidity.

Horn blasts and sideswipe near misses during lane changes are scary stuff. If you're lucky, all you get is a massive dose of horn before swerving back to your own lane. Where did HE come from? Genuine European MINI heated Blind Spot mirrors expand your rear vision area to include that guy shadowing your quarter panel. Easy to install, these mirrors look good, and make merging with traffic a non-contact sport.

These headlights are designed to look like the later Gen 1 MINI OEM HID Projector headlights but utilize H7 high and low beam bulbs. Feature plastic lenses with chrome housing, chrome reflective backing and chrome exterior rings. They are plug and play. Add some Ziza H7 bulbs for multiple output colors. Features: • Manual adjustable leveling • E-code cutoffs on the projector LHD ( left hand drive ) • Chrome housing • Chrome trim rings to match the chrome housing. *Does not contain headlight washers.

Why a strut nut socket? To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification with the use of a torque wrench. Strut nut sockets allow for the use of an Allen wrench to hold the damper shaft while utilizing a torque wrench on the socket to achieve proper torque. Schwaben, a company known for exceptionally crafted specialty tools, now offers 18mm, 19mm, 21mm, 22mm, and 24mm Strut Nut Sockets for your own suspension project. A superb addition to any home mechanic's tool arsenal, this latest Schwaben release is built to last.

If you need technical information about your MINI, for repair or simply for personal satisfaction, a Bentley service manual is a must-have item. DIYers will appreciate the detailed repair procedures and reference data that have made Bentley a trusted source of information for decades, and the industry benchmark for aftermarket technical books on European makes. Owners hungry for a better understanding of the technology and features that make MINI special will enjoy the richly illustrated, detailed explanations of vehicle components, assemblies, and operating strategies.

For years, ECS Tuning has been your trusted source for original, aftermarket, and performance parts for your European car. Our team of enthusiasts have worked hard to build the best catalog in the industry, providing you with the knowledge and expertise to keep your car looking, sounding, and performing great year after year.

The specialty tool experts at Schwaben have released a series of superbly engineered, exceptionally reliable car ramps, ramp extensions, wheel stands, & wheel chocks - now available from ECS tuning. 30" to 67" Low Profile Car Ramps are specially made to accommodate vehicles with low bumper clearance, eliminating the risk of body damage & sliding ramps. Schwaben Wheel Stands feature a cradled wheel support for superior stability compared to jack stands, supporting up to 3000 lbs. And when lifting your vehicle or placing it on an incline, Wheel Chocks are a wise investment.