Get the traction you need and avoid excess wheel spin
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
05-07-2026
Get the traction you need and avoid excess wheel spin
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
05-07-2026
For Hemi 80mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
For stock 60mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Everything needed to keep your intake tract clean and oil free!
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
Bolt on lightweight billet aluminum pulley
10X Entries Into Our F80 M3 Sweepstakes
Vehicles with clutched alternator pulley require hardware kit - ES271279 for installation
This product was last offered at the strikethrough price on
06-13-2026
Direct bolt-in replacement for the stock intake manifold, and features a modular design, with a rotatable plenum that allows for driver side or passenger side throttle body locations.
2X Entries Into Our F80 M3 Sweepstakes
For transverse 1.8T with small port only
Revive the response & feel of your transmission
Requires use of a Clutch Masters or Fidanza flywheel
This product was last offered at the strikethrough price on
09-30-2026
Includes anodized black conversion plate -w- red 2.0T coils and red hold down kit
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
05-02-2026
For Hemi 80mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
For stock 60mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
Designed for high performance naturally aspirated and forced induction EFI vehicles - It can be installed externally or in-tank using optional hardware that is sold separately
This is a general-use high flow fuel pump, not a direct plug-and-play swap in most application
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-09-2026
Designed for the daily-driven, weekend track warrior. Conservatively rated at 400ft/lbs.
For use with South Bend single mass flywheel
Revive the response & feel of your transmission
Requires use of a Clutch Masters or Fidanza flywheel