Robust protection for your WMI installation to ensure peace of mind
Robust protection for your WMI installation to ensure peace of mind
Rev Higher without worry, requires single groove valve keepers
Garrett GEN2 GTX3076R dual ball bearing turbocharger with a T04E frame (4" inlet and 2" outlet compressor housing) and a .61 A/R Divided (Twin-scroll) V-Band Inlet and GT 3" V-Band outlet turbine housing (Ni-Resist Material).
Used for custom, big turbo applications only - ECS Tuning does not offer support on tuning, fueling, exhaust manifold, etc
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
To be used with aftermarket pistons with 21mm wrist pin only
Complete stainless steel system with dual 100mm round tips
Serious engine oil cooling for the most demanding engines
Tune your car with just your laptop and choose gains ranging from 58-88 hp and 88-138 ft-lb of torque
Adjustable High Flow Fuel Pressure Regulator with 1 to 1 boost reference
Smoother shifts and better throttle response in minutes
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-13-2026
All the necessities to move your tank to the trunk of any vehicle.
Billet engine and transmission mounts with 70A durometer dogbone insert
Fine tune your Blow Off or Diverter Valve to the exact needs of your engine with this complete tuning kit.
Fits T3, T3/T4, T25, T28, GT25, GT28, GT30, GT32, GT35, GT37 Turbo Back Housings
Eliminates wear on lower dogbone mount puck, ensures even compression of upper and lower dogbone mount pucks, and eliminates bending moment in dogbone arm.
2X Entries Into Our F80 M3 Sweepstakes
Includes 2.5 gallon tank, stainless steel braided line, 4AN fittings
Includes rings, wire locks, and 21mm wrist pins - 82.5mm bore (stock), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 21mm wrist pins