Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For single mass flywheel
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For single mass flywheel
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For single mass flywheel
Get the traction you need and avoid excess wheel spin
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-07-2026
For Hemi 80mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
For stock 60mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes a new alternator, power steering and crank pulley that allows you to use a stock belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Vehicles with clutched alternator pulley require hardware kit - ES271279 for installation
This product was last offered at the strikethrough price on
06-13-2026
1.8t Ko3 Ko3s inlet pipe 43mm turbo side stock MAF side
Trimming may be required for desired fitment
Recirculation & blow off valve all in one for customers that want both styles
Direct bolt-in replacement for the stock intake manifold, and features a modular design, with a rotatable plenum that allows for driver side or passenger side throttle body locations.
For transverse 1.8T with small port only
Exclusively built for your 57.1mm centerbore VW/Audi. Black Anodized
Capture harmful particles to prevent wear. M14x1.5
Revive the response & feel of your transmission
Requires use of a Clutch Masters or Fidanza flywheel
This product was last offered at the strikethrough price on
03-17-2026
Complete bolt on sway bar kit.
10X Entries For Our 25th Anniversary Sweepstakes!
We Price Match - Give Us A Call or Chat! 22mm front bar and 28mm rear bar
This product was last offered at the strikethrough price on
07-01-2026