144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
The highest quality race bearings available.
Not for use with stock rods
144x22 I beam connecting rods to be used with aftermarket pistons with 22mm wrist pins - Set of Five
Powerful Reliability for the street or track! Includes rings, wire locks, and wrist pins - 82.5mm bore, 9.3:1 CR, 22mm wrist pins (for use with IE rods)
*Requires aftermarket connecting rods with a non-tapered 22mm small end*
Designed to withstand up to 1100hp!
This product was last offered at the strikethrough price on
10-01-2026
144x20mm forged H-beam rods from Integrated Engineering.
*To be used with aftermarket pistons with 20mm wrist pins*
Set of 4
Set of 4, rifle drilled
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
Requires 2mm overbore
Billet main caps for your high horsepower extreme build
Set of 6
Set of 6
Increase bottom-end reliability when adding horsepower
Keep your engine block from flexing under torque
Billet main caps for your high horsepower extreme build, specifically designed to be used with a girdle kit.