Outer Diameter: 11.075mm Length: 36.15mm
Volkswagen Golf IV 1.8T Engine Parts & Accessories
- Cooling
- Covers
- Drive Belts
- Electrical
- Emissions
- Filter
- Fuel
- Gaskets & Seals
- Ignition
- Intake
- Mechanical
- Mount
- Oil Service
- Performance
- Pulleys
- Skid Plate
- Software
- Timing
- Tools
- Turbocharger
- Vacuum System
- Clearance
Standard sized valve head diameter, factory triple groove keeper setup
Standard sized valve head diameter, factory triple groove keeper setup
Supertech 1.5mm oversized piston set including 20mm wrist pins.
Common source of leaks, mounted between your oil filter and engine block
1 large 4 pin connector and 1 small 14 pin connector
For vehicles with VIN from 1J-X-000001 up to 1J-X-800000, splits are in 1999 model year, vehicles with 14 pin connectors only
Located on the driver side of the cylinder head, this pipe contains the coolant tempature sensor
For vehicles with manual transmission or 4-speed automatic transmission only
The most common failure points in your cars cooling system
10X Entries Into Our F80 M3 Sweepstakes
For vehicles with AWP engine code with automatic transmission only
This product was last offered at the strikethrough price on
05-02-2026
Keep your engine running smooth
For vehicles with AWD engine code only
1 large 4 pin connector and 1 small 14 pin connector
For vehicles with VIN from 1J-X-000001 up to 1J-X-800000, splits are in 1999 model year, vehicles with 14 pin connectors only
Connects to intercooler
Does not include securing hardware
For use with 70A, 90A, or 120A Bosch or Valeo alternators. Also fits 120A Hitachi alternator.
From T fitting to hose connected to the valve cover.
For vehicles with a VIN up to 1J-4-009,843 split is in the 2004 model year
1 large 4 pin connector and 1 small 14 pin connector
For vehicles with VIN from 1J-Y-000001, split is in the 2000 model year