Hall type sensor mounted to the master cylinder used to relay clutch pedal position to the ECU
Hall type sensor mounted to the master cylinder used to relay clutch pedal position to the ECU
DOT4 compliant. Boiling point - Dry 307°C (585°F) / Wet 185°C (365°F)
2X Entries Into Our F80 M3 Sweepstakes
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-28-2026
Includes clutch disc and pressure plate
Aids in removal and installation of pressure plate and flywheel bolts
Replacement slave cylinder with integrated throwout bearing
Includes clutch disc, pressure plate, and throwout bearing
ALL SALES FINAL. ITEMS MAY BE DAMAGED OR MISSING COMPONENTS. PLEASE SEE IMAGES BEFORE PURCHASING. Want To Haggle? Give Us A Call Or Chat To Make An Offer On This Product!
This product was last offered at the strikethrough price on
08-07-2026
***Please see photos and description prior to ordering, all sales final.***
ALL SALES FINAL. ITEMS MAY BE DAMAGED OR MISSING COMPONENTS. PLEASE SEE IMAGES BEFORE PURCHASING. Want To Haggle? Give Us A Call Or Chat To Make An Offer On This Product!
Handles up to 395 lb-ft of torque and includes single mass flywheel (15.7 lbs)
Designed for drag or drift cars that see limited street use. Conservatively rated at 520ft/lbs.
For vehicles with FSI engine only
Designed for dedicated drag or drift cars. Conservatively rated at 575ft/lbs.
Designed for builds with up to an insane 1350 FtLbf of torque!
Recommended for track use ONLY
Designed for builds with up to an insane 890 FtLbf of torque!
Designed for builds with up to 600 FtLbf of torque
Recommended for track use ONLY
Replacement slave cylinder with integrated throwout bearing
10X Entries Into Our F80 M3 Sweepstakes
Designed for high-performance track driving capable of approximately 800tf. lbs
Good match for a big turbo build