Set of 6
This product was last offered at the strikethrough price on
09-02-2026
Set of 6
This product was last offered at the strikethrough price on
09-02-2026
Upgrade your MK5 cooling system and safeguard against overheating! Featuring SPAL 861 & 1,328 CFM fans and a plug-and-play wiring harness.
Don't See A Bundle You Want - Give Us A Call Or Chat - We Will Make One!
This product was last offered at the strikethrough price on
05-05-2026
Gain up to 44 horsepower and 90 lb-ft of torque on 91 Octane
This tune can be performed at home with the included UniCONNECT+ cable. Only available for purchase in th
This product was last offered at the strikethrough price on
08-23-2026
2.25" stainless steel with dual 3" polished stainless tips
For vehicles featuring a "dual tip cut out" rear valance
Install your new parts with new hardware
2X Entries Into Our F80 M3 Sweepstakes
APR Low Pressure Fueling System For FWD EA113 and EA888 2.0T models
Call In Or Chat For Best Price!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-07-2026
Includes rings, wire locks, and 23mm wrist pins - 83.0mm bore (0.5mm overbore), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
82.50 Mm Bore – 1.165 In. CH, -7.40 CC, 20mm Pin, 3.248 in. Bore, 9.50:1, Inverted Dome/Dish
For vehicles with FSI engines only
Includes rings, wrist pins, and pin locks - 83mm bore +.5mm overbore, 9.04:1 CR, 92.8mm stroke (stock) 20mm wrist pin
For vehicles with FSI engines only
2.0T FSI 20MM Pion 82.5MM 10.0 FSR Piston Kit
For vehicles with FSI Engines only
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and 23mm wrist pins - 82.5mm bore (stock), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
Includes rings, wire locks, and 21mm wrist pins - 83.0mm bore (0.5mm overbore), 9.1:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 21mm wrist pins
Keep your intake tract clean and oil free, with this BFI baffled Oil Catch Can System