Designed for dedicated track cars. Conservatively rated at 425ft/lbs.
For vehicles with 5-speed manual transmission only. Includes flywheel.
Designed for dedicated track cars. Conservatively rated at 425ft/lbs.
For vehicles with 5-speed manual transmission only. Includes flywheel.
Designed for dedicated drag or drift cars. Conservatively rated at 510ft/lbs.
For vehicles with 5-speed manual transmission only. Includes flywheel.
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
piston set with the strength to withstand high power numbers
5X Entries For Our 25th Anniversary Sweepstakes!
Requires 2mm overbore
Includes the necessary parts to raise your fuel rail for larger injectors
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Engineered for extreme performance and show quality looks!
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
IE Race Intake Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
IE Race Exhaust Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Featuring track density mounts and billet aluminum dogbone mount
For vehicles with manual transmission only
This product was last offered at the strikethrough price on
06-28-2026
Billet main caps for your high horsepower extreme build
5X Entries For Our 25th Anniversary Sweepstakes!
Designed to hold up to 350 ft/lbs of torque to the wheels with a sprung organic disc and steel flyweel
Designed for drag or drift cars that see limited street use. Conservatively rated at 390ft/lbs.
Includes flywheel
1.8t Ko3 Ko3s inlet pipe 43mm turbo side stock MAF side
Trimming may be required for desired fitment
Designed for the daily-driven, weekend track warrior. Conservatively rated at 395 ft/lbs.
For use with Billet 228mm VR6 flywheel only(SV82S)
Complete set of Ferrea high performance valve springs, and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
Handles up to 440 lb-ft of torque and includes single mass flywheel (16lbs)