Weighing in at approximately 235 grams the added inertial mass makes shifting effort substantially less while speeding up the process at the same time.
Weighing in at approximately 235 grams the added inertial mass makes shifting effort substantially less while speeding up the process at the same time.
Recommended for replacement with all mounts.
This product was last offered at the strikethrough price on
09-09-2026
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
Includes 19lb Lightweight Single Mass Flywheel
Keep your engine planted and transfer as much power to the ground as possible
Restore the feel of your clutch
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-30-2026
Connects the selector cable to the shift relay lever
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
11-02-2026
Gain a bit of oil pan ground clearance with these billet motor mount spacers
Includes pressure plate, clutch disc, throwout bearing, and pressure plate hardware
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
06-23-2026
Ensure a proper seal after transmission fluid service. 24x29
Max Torque 456 ft. lbs.
Requires the use of a Spec flywheel
Ideal for the spirited daily-driver. Rated at 375ft/lbs.
Works with stock dual mass flywheel
Improve your geometry from raising or extreme lowering
For Vehicles with 108mm Flanged axles, Please measure prior to ordering
For Vehicles With 108mm Flanged Axles Only. Please Verify Prior To Ordering.
Everything you need to repair a torn boot
This product was last offered at the strikethrough price on
10-27-2026
These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible.
2X Entries Into Our F80 M3 Sweepstakes
For vehicles with manual transmission only
A simple solution for fastening your GS style shift knob to your selector lever.
Hex bolt used in various areas on your European vehicle. M10x32
Secures rear stub axle to the axle beam - 4 required per side