Fully polished 2.25" system
For vehicles featuring a "non-cutout' rear valance
Fully polished 2.25" system
For vehicles featuring a "non-cutout' rear valance
Get your power to the ground! Can handle up to 360 lb-ft of torque!
For use with Billet 228mm VR6 flywheel only(SV82S)
Best suited for high horsepower vehicles, most track applications, and capable of holding up to 400 whp.
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Adjustable sport tuned suspension for aggresive handling
This product was last offered at the strikethrough price on
02-27-2026
Our Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
For vehicles with AWW or AWD engine code only
2.25" stainless steel with dual 3" polished stainless tips
For vehicles featuring a "dual tip cut out" rear valance
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
Works with stock dual mass flywheel
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For single mass flywheel
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For single mass flywheel
Upgrade to a slotted rotor for improved braking
2X Entries For Our 25th Anniversary Sweepstakes!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-05-2026
Get the traction you need and avoid excess wheel spin
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-07-2026
Handles up to 340 lb-ft of torque and includes single mass flywheel (16lbs)
For Hemi 80mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
For stock 60mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*