Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Designed for dedicated track cars. Conservatively rated at 485ft/lbs.
Race inspired performance, NDX formula provides a great initial bite
2X Entries Into Our F80 M3 Sweepstakes
Includes pad wear sensor
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-14-2026
Height adjustable with average lowering of 1.4"-2.6"F, 1.4"-2.6"R.
For Sedan models only
Set of 4 connecting rods, to be paired with 21mm wrist pin aftermarket pistons (JE, Wiseco, Mahle ETC)
For vehicles with TSI engines and for use with aftermarket pistons with 21mm wrist pin only.
Streetable clutch holds up to 350 FT LBS TQ
For vehicles with TSI engines only
Engage the road with precision, confidence and reliability with our ECS Poly Control Arm Bushings!
10X Entries Into Our F80 M3 Sweepstakes
Mounts rear lower control arms to subframe
This product was last offered at the strikethrough price on
06-13-2026
Good for a blend of street and track driving, up to 500 FT LBS TQ
Tune your car with just your laptop and choose gains ranging from 58-88 hp and 88-138 ft-lb of torque
2.0 TSI Gen1 Cold Air Intake System
For TSI models only
Smoother shifts and better throttle response in minutes
10X Entries Into Our F80 M3 Sweepstakes
For vehicles from the 2009 model year only
This product was last offered at the strikethrough price on
06-13-2026
Aluminum Link that provide direct transition of suspension movement to the anti-roll bar.
This product was last offered at the strikethrough price on
09-22-2026
Billet engine and transmission mounts with 70A durometer dogbone insert
For vehicles from the 2009 model year only
Dual bolt pattern spacers designed to fit most VW/Audi vehicles with 5x112 and 5x100 bolt patterns and 57.1mm center bore
2X Entries Into Our F80 M3 Sweepstakes
Upgrade your stopping power to the MK5 R32 / MK6 Golf R setup with your choice of calipers, rotors, pads and more!
10X Entries Into Our F80 M3 Sweepstakes
Requires a minimum of 18" diameter wheels for clearance
Includes everything you need to install spacers on two wheels
10X Entries Into Our F80 M3 Sweepstakes
Fits most aftermarket wheels that require conical seat wheel bolts
This product was last offered at the strikethrough price on
06-13-2026