Designed for builds with up to 740 FtLbf of torque
Designed for builds with up to 740 FtLbf of torque
Designed for drag or drift cars that see limited street use. Conservatively rated at 520ft/lbs.
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 600+ ft/lbs.
Ideal for the spirited daily-driver. Rated at 300 ft/lbs.
Factory replacement unit
Everything you need to install a lightweight flywheel in your MK6! Featuring an ECS single-mass flywheel, OE LuK clutch kit, and installation hardware.
10X Entries Into Our F80 M3 Sweepstakes
This product was last offered at the strikethrough price on
05-02-2026
Designed for dedicated drag or drift cars. Conservatively rated at 575 ft/lbs
Designed for dedicated track cars. Conservatively rated at 485 ft/lbs.
Designed for dedicated track cars. Conservatively rated at 485ft/lbs.
For vehicles with FSI engines only
Requires use of a Spec clutch kit
Secures the flywheel to crankshaft. M10X1X22.3
Secures flywheel to crankshaft. Total of 8 required.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-04-2026
Requires use of a Spec clutch kit
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
For use with single mass flywheel only
Install new hardware with your new parts. M8x14
Used to secure the clutch pressure plate
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-23-2026
Designed for track use while still streetable. Conservatively rated at 450ft/lbs.
Endurance clutch holds up to 450 FT LBS TQ
For use with stock dual mass flywheel