JHM Fuel Pump Internals Upgrade installed into a brand new OEM Hitachi High Pressure Fuel Pump.
JHM Fuel Pump Internals Upgrade installed into a brand new OEM Hitachi High Pressure Fuel Pump.
Install your new parts with new hardware
2X Entries Into Our F80 M3 Sweepstakes
Eliminate excess drivetrain slop and movement with minimal additional NVH
Gain up to 87 horsepower and 106 lb-ft of torque on 93 Octane
This tune can be performed at home with the included UniCONNECT+ cable. Only available for purchase in th
Requires Unitronic 3 Inch Downpipe
2.25" stainless steel with dual 3" polished stainless tips
For vehicles featuring a "dual tip cut out" rear valance
Closed airbox system for added filtration and performance
For vehicles without secondary air injection only
Closed airbox system for added filtration and performance
For vehicles without secondary air injection only
Dyno-proven, one-piece fully-enclosed design with high-quality construction
2X Entries Into Our F80 M3 Sweepstakes
Flow-bench optimized to provide maximum performance with your factory intake system!
Call In Or Chat For Best Price!
This product was last offered at the strikethrough price on
09-28-2026
For Hemi 80mm throttle body
Requires windshield washer fluid reservoir relocation and custom intercooler piping. Will also require ES279431.
Includes rings, wire locks, and 23mm wrist pins - 83.0mm bore (0.5mm overbore), 9.6:1 CR, 92.8mm stroke (stock)
To be used with connecting rods that accept 23mm wrist pins
larger than stock unit, reduces charge temperatures and increases power
This product was last offered at the strikethrough price on
09-30-2026
Unleash the raw, aggressive tone of your Volkswagen Golf GTI with XFORCE’s 3” stainless cat-back—reduced backpressure, bold sound, and polished 4” tips to match the performance.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-17-2026
Provides a dramatic reduction in charge air temperatures to ensure peak performance is achieved and sustained while resisting heat-soak after repeated efforts and in harsh climates and conditions.
For stock 60mm throttle body
For vehicles with large port cylinder head only. Vehicles with small port will require ES2794391.
82.50 Mm Bore – 1.165 In. CH, -7.40 CC, 20mm Pin, 3.248 in. Bore, 9.50:1, Inverted Dome/Dish
For vehicles with FSI engines only