Designed for the daily-driven, weekend track warrior. Conservatively rated at 400ft/lbs.
Works with stock flywheel
Designed for the daily-driven, weekend track warrior. Conservatively rated at 400ft/lbs.
Works with stock flywheel
Bolt-in replacement for your factory plastic valve
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-18-2026
Offers more holding power with a full faced, multi-friction clutch disc - Holds up to 545 ft/lbs torque
+1mm oversized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
+1mm oversized valves & singe groove keeper setup - Requires machine work to cylinder head
Engineered to convert your 1.8T clutch to the much more durable S4 clutch
10X Entries Into Our F80 M3 Sweepstakes
To be used with RA4 240MM, S4, & RS4 clutch kits only
This product was last offered at the strikethrough price on
06-13-2026
Easily allows the removal of front axles when converting your B5 A4 to RWD (rear wheel drive) from Quattro
10X Entries Into Our F80 M3 Sweepstakes
Up To VIN 8D-1-050001, split is in the 2001 model year
This product was last offered at the strikethrough price on
06-13-2026
This hose pair is designed to replace the outrageously expensive, failure-prone factory rubber hoses
2X Entries Into Our F80 M3 Sweepstakes
Includes springs, retainers, and valve seats
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Designed for high performance naturally aspirated and forced induction EFI vehicles - It can be installed externally or in-tank using optional hardware that is sold separately
This is a general-use high flow fuel pump, not a direct plug-and-play swap in most application
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-14-2026
Ideal for shops and enthusiasts looking to recalibrate their vehicles for modified hardware
Features the Power Plus I Pressure Plate with a 6-puck ceramic disc - 170% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels
Featuring the Power Plus I pressure plate paired with a full-face ceramic disc - 170% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
10-18-2026
Features the Power Plus I Pressure Plate with Clutch Masters New Formula Button disc - 110% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels
Features the Power Plus I Pressure Plate with a Steel Back Segmented Kevlar disc - 110% increased holding capacity
Recommended to be used with Clutch Masters steel (FW-029-SF) or aluminum (FW-029-AL) flywheels