Our Red Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Up to VIN 8E-4-191000, split is in the 2004 model year
Our Red Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Up to VIN 8E-4-191000, split is in the 2004 model year
Reduce unwanted engine movement with a full polyurethane mount
Includes the necessary parts to raise your fuel rail for larger injectors
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Includes wrinkle red conversion plate -w- red 2.0T coils and red hold down kit
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
IE Race Exhaust Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
IE Race Intake Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 525+ ft/lbs.
Includes single mass flywheel
11lbs lighter than OEM Flywheel
Must use B7 S4 clutch
Designed for dedicated track cars. Conservatively rated at 425ft/lbs.
Works with stock dual mass flywheel
Complete set of Ferrea high performance valve springs, and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Lightweight flywheel with the S4 pressure plate and disc
Don't See A Bundle You Want - Give Us A Call Or Chat - We Will Make One!
This product was last offered at the strikethrough price on
05-05-2026
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Holds the driveshaft where it should be.
For vehicles with 01A, 01E, or 0A3 transmissions.
Features a full faced, multi-friction disc with a torque rating of 540 ft/lbs