Designed for drag or drift cars that see limited street use. Conservatively rated at 365ft/lbs.
Designed for drag or drift cars that see limited street use. Conservatively rated at 365ft/lbs.
Designed for high performance naturally aspirated and forced induction EFI vehicles - It can be installed externally or in-tank using optional hardware that is sold separately
This is a general-use high flow fuel pump, not a direct plug-and-play swap in most application
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
07-26-2026
Finally a solution to replacing the entire driveshaft
Fits vehicles up to VIN 8E-4-030692 - Split is in the 2004 model year
Holds the driveshaft where it should be
For vehicles with 6HP19 transmissions (6 speed automatic)
Stock sized valve head diameter, factory triple groove keeper setup - Includes Supertech valves and IE valve seals
10X Entries For Our 25th Anniversary Sweepstakes!
*Existing factory triple-groove valve keepers are to be reused*
Our Red Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Up to VIN 8E-4-191000, split is in the 2004 model year
Lightweight flywheel with the RS4 pressure plate and disc
Don't See A Bundle You Want - Give Us A Call Or Chat - We Will Make One!
This product was last offered at the strikethrough price on
05-05-2026
Takes 1.8L 06A engine to 2.0L (2008cc), by increasing the stroke and bore of the engine
Requires block machine work (+2mm overbore) - To be used in conjunction with IE 2.0L Stroker Crank (IESKVA6) and 144x20 connecting rods
Includes the necessary parts to raise your fuel rail for larger injectors
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Includes wrinkle red conversion plate -w- red 2.0T coils and red hold down kit
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
IE Race Exhaust Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
IE Race Intake Camshaft for 500+ Horsepower Builds!
5X Entries For Our 25th Anniversary Sweepstakes!
Designed for extreme power that needs to be put to the wheels. Conservatively rated at 525+ ft/lbs.
Includes single mass flywheel
Designed for dedicated track cars. Conservatively rated at 425ft/lbs.
Works with stock dual mass flywheel
Complete set of Ferrea high performance valve springs, and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
50 Durometer rubber construction
This product was last offered at the strikethrough price on
07-10-2026