Larger diameter pulley increases the speed at which the supercharger spins, increasing the boost pressure output
Most Stage 2+ software tunes are compatible with this kit. Be sure to use the correct software for 192mm
Larger diameter pulley increases the speed at which the supercharger spins, increasing the boost pressure output
Most Stage 2+ software tunes are compatible with this kit. Be sure to use the correct software for 192mm
As our beloved B8's age the stock center support bearing starts to wear out causing drivetrain clunk. This upgraded unit keeps the driveshaft firmly in place at all times and its polyurethane construction ensures it will outlast the squishy rubber bushing
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Average gain of 121 horsepower and 92 lb-ft of torque on 91 Octane
5X Entries For Our 25th Anniversary Sweepstakes!
Perform tune in minutes from the comfort of your own driveway! Only available for purchase in the United States and Canada.
For vehicles with DSG transmission only
Engineered for dyno proven performance and show quality looks!
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Kit with catch can and rubber hose; for retrofitting on a variety of vehicles.
Increased horsepower and torque throughout the powerband when paired with Stage 2 Performance Software.
*3.0 TFSI Performance Software is sold separately and required in order for this pulley to yield a performance benefit.*
Reduce restrictions and increase cooling! Whether you call it an intercooler, a heat exchanger, a radiator, or something else - this is the product for you.
10X Entries For Our 25th Anniversary Sweepstakes!
Fits B8 Pre-Facelift Models Without ADS
This product was last offered at the strikethrough price on
06-13-2026
A high performance clutch design for the track!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
08-03-2026
ECS Lightweight Flywheel with a Spec Stage 3+ clutch kit rated at 595ft/lbs
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
50 Durometer rubber construction - Single engine mount
*Priced as one single mount*
Engineered for increased engine performance with show quality looks
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
06-13-2026
Our Red Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Increases charger RPM by 10% - Higher boost levels equals more power!
5X Entries For Our 25th Anniversary Sweepstakes!
Installation of this kit is now easier than ever, without the need of removing the crash bar to drill holes for bracket mounting.
Add horsepower, torque, sound, and throttle response to your B8/B8.5 S4!
5X Entries For Our 25th Anniversary Sweepstakes!
Capture harmful oil vapors and keep your intake tract clean. Now featuring an easy to empty drain plug!
10X Entries For Our 25th Anniversary Sweepstakes!
For use with custom plumbing and ECS universal mounting bracket kit
This product was last offered at the strikethrough price on
05-02-2026