Designed to hold up to 350 ft/lbs of torque to the wheels with a sprung organic disc and steel flyweel
Designed to hold up to 350 ft/lbs of torque to the wheels with a sprung organic disc and steel flyweel
Designed for drag or drift cars that see limited street use. Conservatively rated at 390ft/lbs.
Includes flywheel
Complete set of Ferrea high performance valve springs, and titanium retainers
5X Entries For Our 25th Anniversary Sweepstakes!
Handles up to 440 lb-ft of torque and includes single mass flywheel (16lbs)
Tidy up your cabin with the COBB OBDII Universal Cable!
Best suited for high horsepower vehicles, most track applications, and capable of holding up to 400 whp.
10X Entries For Our 25th Anniversary Sweepstakes!
This product was last offered at the strikethrough price on
05-02-2026
Our Kevlar accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Handles up to 340 lb-ft of torque and includes single mass flywheel (16lbs)
For Hemi 80mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
Requires windshield washer fluid reservoir relocation , customer intercooler piping, and Hemi 80mm throttle body
For stock 60mm throttle body
5X Entries For Our 25th Anniversary Sweepstakes!
Requires windshield washer fluid reservoir relocation and custom intercooler piping
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
For 02J Transmissions - Includes new bearings, speedo gear and bolt kit.
Includes a new alternator, power steering and crank pulley that allows you to use a stock belt.
10X Entries For Our 25th Anniversary Sweepstakes!
Vehicles with clutched alternator pulley require hardware kit - ES271279 for installation
This product was last offered at the strikethrough price on
06-13-2026
Direct bolt-in replacement for the stock intake manifold, and features a modular design, with a rotatable plenum that allows for driver side or passenger side throttle body locations.
For transverse 1.8T with small port only