Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81.5mm bore (0.5mm overbore), 8.5:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 82mm bore (1mm overbore), 9.25:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Rev higher and increase your RPMs safely!
Rev higher and increase your RPMs safely!
+1mm oversized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
+1mm oversized valves & singe groove keeper setup - Requires machine work to cylinder head
Valve springs and retainers are a MUST for high revving engines!
Includes rings, wire locks, and wrist pins - 82mm bore, 9:8 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Includes rings, wire locks, and wrist pins - 81mm bore (stock), 9:1 CR, 86.4mm stroke (stock)
*For use with 20mm wrist pin connecting rods*
Stock fitment while being able to handle higher boost applications
FITS FACTORY PISTONS WITH 20MM WRIST PINS ONLY
Stock sized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
Increase bottom-end reliability when adding horsepower
This matched high-performance camshaft set features aggressive profiles and pre-set centerlines to optimize valvetrain sequencing for 400+ HP turbocharged engines.
Buy Integrated Engineering Software from 9/3/26 - 9/30/26 for a chance to win your Software for FREE!
IE Street Intake Camshaft for 300+ Horsepower Builds!
Buy Integrated Engineering Software from 9/3/26 - 9/30/26 for a chance to win your Software for FREE!
Stock sized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
+1mm oversized valve head diameter, single groove keeper setup for high RPM use - Includes Supertech valves, single groove keepers and IE valve seals
10X Entries Into Our F80 M3 Sweepstakes
*Oversized valves require extra machine work to the cylinder head.*